2001 Chevrolet Astro | Base, LS, LT | 6 Cyl 4.3 L GAS
$9.55MSRP: $20.04
You Save: $10.49 (53%)
FAQ for Daytime Running Light Relay Repair
Q: How to install the daytime running lamp?
A:
You can install the relay to the block, the cover to the block, and the left side of the knee bolster.
By Bob
GM Specialist
29/10/2022
Q: How to remove the daytime running lamp?
A:
You need to remove the left side of the knee bolster. Then you can remove the cover from the block and the relay from the block.
By Bob
GM Specialist
29/10/2022
FAQ for Other Repair Info
Q: How to install the starter motor?
A:
You need to connect the Starter motor field leads to the starter motor. Then you can install the two starter motor mounting bolts and the shims, lower the vehicle, and connect the battery negative cable.
Q: How to install the body control module?
A:
You need to install the Body Control Module and apply pressure on the center of the body control module. Then you need to connect the electrical connectors to the body control module and install the heater control and the radio. Next, you can perform the body control module programming and clear the diagnostic trouble codes (DTCs).
Q: How to install the cruise control module?
A:
You need to install the Cruise Control Module and the cruise control module bolts. After connecting the electrical connector, you can install the cruise control cable and perform the functional check.