2001 Buick Regal Seat Heater Switch

You can install the seat heater switch in the assembly, the electrical connector to the seat heater switch, and align the switch assembly to the console trim plate and snap it into position to secure.

The recommended torque is 42 N.m (31 lb-ft).

You can install the heater module to the front seat, connect the electrical connectors to the heater module, install the rosebud that attaches the module to the front seat frame, the front bucket seat adjuster-to-floor pan bolts, and reposition the front seat to the original position.

You can position the seat to the full-up position, remove the front seat frame-to-floor bolts and rotate the seat forward to access the heater module, the rosebud retaining module from the seat frame, disconnect the electrical connector from the heater module, and remove the heater module from the front seat.

You can remove the center console switch assembly by pressing in the clips on each end and lifting the assembly out, the electrical connector from the right or left heater switch, and the heater seat switch from the switch assembly.