< Back ×
My Vehicle Change Vehicle
2001 Buick Regal
< Back to View All
Crankshafts, Pistons, Rings & Connecting Rods
- Department
- Brands
- Prices
OEM (Genuine) 2001 Buick Regal Bearing Set
PartNumber: 89017700
Product Specifications- Notes: All Models
- Item Dimensions: 4.2 x 4.2 x 2.2 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 18005399, 89017565, 12537418, 12480819
- Part Description: 2001 Buick Regal Bearing Set
Vehicle Fitment- 2001 Buick Regal | 25th Anniversary Edition, Base, Custom, GNX, Gran Sport, Grand National, GS, GSE, Limited, LS, LSE, Olympic Gold Edition, T-Type | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS
$15.17 MSRP:$24.07You Save: $8.90 (37%)
Sealed Power® Aluminum Connecting Rod Bearing Set for 2001 Buick Regal
PartNumber: 3760AProduct Specifications- Notes: with 0.721in Overall Length;Standard Size; A-Series aluminum bearings
- Housing Bore Max: 60.312
- Housing Bore Min: 60.300
- Oil Clearance Max: 0.076
- Oil Clearance Min: 0.0007"
- Overall Length Max: 18.310
- Package Alert: Pair
- Part Material: A-Series Aluminum
- Size: Standard
- Standard Shaft Max: 2.2495"
- Standard Shaft Min: 2.2487"
- UPC: 614046738232
- Wall Thickness Max: 0.0619"
- Part Description: 2001 Buick Regal Aluminum Connecting Rod Bearing Set
Vehicle Fitment- 2001 Buick Regal | All Trims | 6 Cyl 3.8L
$6.96
FAQ for Rod Bearing Repair
Q: How to install the connecting rod bearing?
A:
You can dip the connecting rod cap bolts in clean engine oil, use clean engine oil to lubricate the bearing surface, install the upper connecting rod bearing, install the lower connecting rod bearing to the connecting rod cap, the connecting rod cap, the connecting rod cap bolts, the spark plug(s) to the cylinder(s), the oil pan, and inspect for proper oil pressure, and leaks.
By Bob
GM Specialist
02/11/2022Q: How to remove the connecting rod bearing?
A:
You can remove the oil pan, and the spark plug(s) from the cylinder(s) that is being serviced, position the connecting rod to be serviced to Bottom Dead Center (BDC) by rotating the crankshaft, remove the connecting rod cap bolts, the connecting rod cap and lower connecting rod bearing, the lower connecting rod bearing from the connecting rod cap, install the J 41507to the connecting rod, remove the upper connecting rod bearing, wipe the oil from the bearings, inspect the connecting rod bearings, and measure the bearing clearance.
By Bob
GM Specialist
02/11/2022