< Back ×
My Vehicle Change Vehicle
2001 Buick Regal
< Back to View All
Interior & Exterior Trim
- Department
- Prices
OEM (Genuine) 2001 Buick Regal Molding Asm-Windshield Side Upper Garnish *Neutral Medium
PartNumber: 10316534
Product Specifications- Notes: Neutral
- Location: Driver Side
- Other Names: Windshield Pillar Trim
- Item Dimensions: 35.2 x 6.9 x 6.3 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10432706
- Part Description: 2001 Buick Regal Molding Asm-Windshield Side Upper Garnish *Neutral Medium
Vehicle Fitment- 2001 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
OEM (Genuine) 2001 Buick Regal Molding Asm-Windshield Side Upper Garnish *Neutral Medium
PartNumber: 10316533
Product Specifications- Notes: Neutral
- Location: Passenger Side
- Other Names: Windshield Pillar Trim
- Item Dimensions: 28.9 x 17.8 x 8.9 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10432705
- Part Description: 2001 Buick Regal Molding Asm-Windshield Side Upper Garnish *Neutral Medium
Vehicle Fitment- 2001 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
OEM (Genuine) 2001 Buick Regal Molding Asm-Windshield Side Upper Garnish *Gray
PartNumber: 10316531Product Specifications- Notes: Gray
- Location: Passenger Side
- Other Names: Windshield Pillar Trim
- Item Dimensions: 28.7 x 17.8 x 9.0 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10432701
- Part Description: 2001 Buick Regal Molding Asm-Windshield Side Upper Garnish *Gray
Vehicle Fitment- 2001 Buick Regal | GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
OEM (Genuine) 2001 Buick Regal Molding Asm-Windshield Side Upper Garnish *Gray
PartNumber: 10316532Product Specifications- Notes: Gray
- Location: Driver Side
- Other Names: Windshield Pillar Trim
- Item Dimensions: 33.1 x 6.5 x 5.7 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10295139, 10432702
- Part Description: 2001 Buick Regal Molding Asm-Windshield Side Upper Garnish *Gray
Vehicle Fitment- 2001 Buick Regal | GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
OEM (Genuine) 2001 Buick Regal PANEL, Cowl Trim
PartNumber: 10400396
Product Specifications- Notes: Neutral
- Location: Driver Side
- Other Names: Cowl Trim, Pillar Trim
- Item Dimensions: 10.9 x 5.7 x 1.7 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 Buick Regal PANEL, Cowl Trim
Vehicle Fitment- 2001 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
OEM (Genuine) 2001 Buick Regal Panel-Body Hinge Pillar Trim *Gray
PartNumber: 10438131Product Specifications- Notes: Gray
- Location: Passenger Side
- Other Names: Cowl Trim, Pillar Trim
- Item Dimensions: 11.9 x 6.3 x 4.3 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10400389
- Part Description: 2001 Buick Regal Panel-Body Hinge Pillar Trim *Gray
Vehicle Fitment- 2001 Buick Regal | GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
OEM (Genuine) 2001 Buick Regal Panel-Body Hinge Pillar Trim *Neutral
PartNumber: 10438133
Product Specifications- Notes: Neutral
- Location: Passenger Side
- Other Names: Cowl Trim, Pillar Trim
- Item Dimensions: 12.1 x 6.4 x 4.4 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 Buick Regal Panel-Body Hinge Pillar Trim *Neutral
Vehicle Fitment- 2001 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
OEM (Genuine) 2001 Buick Regal PANEL, Cowl Trim
PartNumber: 10400390Product Specifications- Notes: Gray
- Location: Driver Side
- Other Names: Cowl Trim, Pillar Trim
- Item Dimensions: 11.0 x 5.7 x 1.7 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 Buick Regal PANEL, Cowl Trim
Vehicle Fitment- 2001 Buick Regal | GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
FAQ for Pillar Panels Repair
Q: How to remove the trim panel?
A:
You can remove the front carpet retainer, the rear carpet retainer, start with the top retainer use the J 38778 to disengage the retainers and remove the lower trim panel from the center pillar, and remove the seat belt from the slot in the lower trim panel.
By Bob
GM Specialist
02/11/2022Q: What is the installation procedure for the trim panel?
A:
The procedure is to engage the push-in retainers to install the quarter upper trim and press the door weatherstrip back onto the pinch-weld flange.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the trim panel?
A:
The procedure is to pull the door weatherstrip from the pinch weld flange as required and use the J 38778 to disengage the push-in retainer and remove the quarter upper trim.
By Bob
GM Specialist
02/11/2022Q: How to install the trim panel?
A:
You can install the seat belt to the slot in the lower trim panel, and the lower trim panel to the center pillar, push on the lower trim panel and install the front carpet retainer, and the rear carpet retainer.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the upper seat belt guide loop attachment nut?
A:
The recommended torque is 42 N.m (31 lb-ft).
By Bob
GM Specialist
02/11/2022Q: How to remove the rear door panel?
A:
You can remove the rear door trim panel and the rear door water deflector from the rear door inner panel.
By Bob
GM Specialist
01/11/2022Q: How to install the rear door panel?
A:
You can position the rear door water deflector to the rear door inner panel, align the hook pockets with the trim hook holes in the rear door inner panel, press the rear door water deflector to the rear door inner panel until fully seated, and install the rear door trim panel.
By Bob
GM Specialist
01/11/2022Q: How to install the front door panel?
A:
You can connect the door lock electrical connector to the inside door handle bezel, the radio speaker electrical connector to the inside door handle bezel, press the inside door handle bezel onto the door trim panel, and install the inside door handle bezel screw.
By Bob
GM Specialist
01/11/2022Q: How to remove the front door panel?
A:
You can remove the inside door handle bezel screw, use a small flat-bladed tool, remove the inside door handle bezel from the door trim panel, remove the inside door lock electrical connector, the inside door handle bezel radio speaker electrical connector, and the inside door handle bezel from the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the inside door handle bezel screw?
A:
The recommended torque is 2 N.m (18 lb in).
By Bob
GM Specialist
01/11/2022See more FAQs (5)