< Back ×
My Vehicle Change Vehicle
2001 Buick Regal
< Back to View All
Hoods
- Department
- Prices
OEM (Genuine) 2001 Buick Regal Latch
PartNumber: 10423017
Product Specifications- Other Names: Latch, Lock
- Item Dimensions: 7.6 x 6.3 x 4.4 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10255215
- Part Description: 2001 Buick Regal Latch
Vehicle Fitment- 2001 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
$35.74 MSRP:$53.93You Save: $18.19 (34%)
OEM (Genuine) 2001 Buick Regal Latch
PartNumber: 20513752
Product Specifications- Other Names: Latch, Lock
- Item Dimensions: 6.3 x 3.2 x 3.1 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 Buick Regal Latch
Vehicle Fitment- 2001 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
OEM (Genuine) 2001 Buick Regal Lock Assembly
PartNumber: 20513755
Product Specifications- Notes: All Models
- Item Dimensions: 6.2 x 3.2 x 3.2 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 Buick Regal Lock Assembly
Vehicle Fitment- 2001 Buick Regal | 25th Anniversary Edition, Custom, Gran Sport, GS, GSE, Limited, LS, LSE, Olympic Gold Edition | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
FAQ for Hood Latch Repair
Q: How to install the hood latch?
A:
You can install the hood latch support to the vehicle, the bolts to the hood latch support at the upper tie bar, the nut to the hood latch support at the lower tie bar, the front bumper fascia bracket to the hood latch support, and the hood latch to the hood latch support bracket.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the bolt?
A:
The recommended torque is 25 N.m (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to remove the hood hinge?
A:
You can remove the hood, the hood assist rod, and the hood rear side seals from the hood hinge, loosen the hood hinge to fender bolts, center punch the spot weld, drill out the spot weld, remove the hood hinge to fender bolts, the hood hinge from the fender, and repair the paint on the fender.
By Bob
GM Specialist
01/11/2022Q: How to install the hood weatherstrip?
A:
You can align the weatherstrip to the flange, start at the passenger side corner, press the weatherstrip onto the flange, and close the hood.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the nut?
A:
The recommended torque is 10 N.m (18 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the hood weatherstrip?
A:
The procedure is to open the hood, use the J 38778 to remove the push-in retainers from the front air seal, and remove the front air seal from the hood.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the bolt?
A:
The recommended torque is 25 N.m (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the hood latch release handle bolt?
A:
The recommended torque is 2 N.m (18 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the hood weatherstrip?
A:
The procedure is to install the front air seal to the hood, the push-in retainers to the front air seal into the hood, and close the hood.
By Bob
GM Specialist
01/11/2022Q: How to remove the hood latch?
A:
You can open the hood, remove the hood latch from the hood latch support bracket, the front bumper fascia bracket from the hood latch support, the bolts from the hood latch support bracket at the upper tie bar, the nut from the hood latch support bracket at the lower tie bar and the hood latch support bracket from the vehicle.
By Bob
GM Specialist
01/11/2022See more FAQs (7)