< Back ×
My Vehicle Change Vehicle
2001 Buick Regal
< Back to View All
Exhaust Manifolds, Pipes & Mufflers
- Department
- Prices
OEM (Genuine) 2001 Buick Regal Cross Over Pipe
PartNumber: 24503125
Product Specifications- Item Dimensions: 17.5 x 6.9 x 5.3 inches
- Item Weight: 7.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 Buick Regal Cross Over Pipe
Vehicle Fitment- 2001 Buick Regal | 25th Anniversary Edition, Custom, Gran Sport, GS, GSE, Limited, LS, LSE, Olympic Gold Edition | 6 Cyl 3.8 L GAS
$433.58 MSRP:$654.11You Save: $220.53 (34%)
OEM (Genuine) 2001 Buick Regal Converter & Pipe
PartNumber: 10343187
Product Specifications- Notes: All Models; 3.8l; W/O Supercharger; All
- Other Names: Catalytic Converter, Converter & Pipe
- Item Dimensions: 6.9 x 38.7 x 13.9 inches
- Item Weight: 18.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12564328, 10337610
- Part Description: 2001 Buick Regal Converter & Pipe
Vehicle Fitment- 2001 Buick Regal | LS | 6 Cyl 3.8 L GAS
OEM (Genuine) 2001 Buick Regal Converter & Pipe
PartNumber: 10343185
Product Specifications- Notes: W/O Supercharger, All
- Other Names: Catalytic Converter, Converter & Pipe
- Item Dimensions: 43.4 x 13.4 x 7.2 inches
- Item Weight: 17.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10301642, 25325228
- Part Description: 2001 Buick Regal Converter & Pipe
Vehicle Fitment- 2001 Buick Regal | LS | 6 Cyl 3.8 L GAS
OEM (Genuine) 2001 Buick Regal 3Way Catalytic Convertor Assembly (W/ Exhaust Manifold P
PartNumber: 10343189Product Specifications- Notes: W/Supercharger, All
- Other Names: Catalytic Converter, Converter & Pipe
- Item Dimensions: 38.1 x 11.8 x 7.7 inches
- Item Weight: 18.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 Buick Regal 3Way Catalytic Convertor Assembly (W/ Exhaust Manifold P
Vehicle Fitment- 2001 Buick Regal | GS | 6 Cyl 3.8 L GAS
OEM (Genuine) 2001 Buick Regal Exhaust Muffler Assembly (W/ Exhaust Pipe & Tail Pipe)
PartNumber: 10300205
Product Specifications- Notes: W/Supercharger
- Other Names: Muffler, Muffler & Pipe
- Item Weight: 37.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10403074, 10256824
- Part Description: 2001 Buick Regal Exhaust Muffler Assembly (W/ Exhaust Pipe & Tail Pipe)
Vehicle Fitment- 2001 Buick Regal | 25th Anniversary Edition, GS, GSE | 6 Cyl 3.8 L GAS
OEM (Genuine) 2001 Buick Regal Exhaust Muffler Assembly (W/ Exhaust Pipe & Tail Pipe)
PartNumber: 10315292Product Specifications- Notes: W/O Supercharger
- Other Names: Muffler, Muffler & Pipe
- Item Dimensions: 112.3 x 24.7 x 8.2 inches
- Item Weight: 43.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10256823, 10300204, 10408316
- Part Description: 2001 Buick Regal Exhaust Muffler Assembly (W/ Exhaust Pipe & Tail Pipe)
Vehicle Fitment- 2001 Buick Regal | GS, LS, LSE | 6 Cyl 3.8 L GAS
FAQ for Exhaust Pipe Repair
Q: How to remove the exhaust pipe gasket?
A:
You can remove the right (rear) exhaust manifold nuts and the exhaust manifold pipe gasket, disconnect any hangers necessary to reposition the exhaust system and reposition the exhaust system.
By Bob
GM Specialist
01/11/2022Q: How to install the exhaust pipe gasket?
A:
You can install the exhaust manifold pipe gasket, return the exhaust system to the proper position, connect any hangers, remove the exhaust system support, install the right (rear) exhaust manifold pipe stud nuts to the exhaust manifold pipe studs, and inspect the exhaust system for leaks and underbody contact.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the exhaust crossover heat shield nut?
A:
The recommended torque is 20 Nm (15 ft. lbs.).
By Bob
GM Specialist
29/10/2022Q: How to install the exhaust crossover pipe?
A:
You can install the exhaust crossover pipe seal to the exhaust crossover pipe at the right exhaust manifold connection, the exhaust crossover pipe, the exhaust crossover pipe bolts, the exhaust crossover heat shield, the exhaust crossover heat shield nuts, the exhaust crossover heat shield nuts, the throttle body air inlet duct and the air cleaner assembly, and the fuel injector sight shield.
By Bob
GM Specialist
29/10/2022Q: How to remove the exhaust crossover pipe?
A:
You can remove the fuel injector sight shield, the throttle body air inlet duct and the air cleaner assembly, the exhaust crossover heat shield nuts, the exhaust crossover heat shield, the exhaust crossover pipe bolts, the exhaust crossover pipe, and the exhaust crossover pipe seal.
By Bob
GM Specialist
29/10/2022Q: How to remove the exhaust pipe/muffler hanger?
A:
You can remove the exhaust pipe rear hanger insulator from the exhaust pipe rear hanger bracket, the exhaust pipe rear hanger bolt, the exhaust pipe rear hanger bracket, the exhaust pipe rear hanger insulators from the exhaust muffler rear hanger bracket, the outboard rear bumper impact bar bolt, the inboard rear bumper impact bar bolt, and the exhaust muffler rear hanger bracket.
By Bob
GM Specialist
29/10/2022Q: How to install the exhaust pipe/muffler hanger?
A:
You can install the exhaust muffler rear hanger bracket, the inboard rear bumper impact bar bolt, the exhaust pipe rear hanger insulators to the exhaust muffler rear hanger bracket, the exhaust muffler rear hanger bracket, the inboard rear bumper impact bar bolt, the exhaust pipe rear hanger insulators to the exhaust muffler rear hanger bracket, remove the support from the exhaust system, and inspect the exhaust system for leaks and underbody contact.
By Bob
GM Specialist
29/10/2022See more FAQs (2)