2001 Buick Regal Brake Master Cylinder

You can install the lower control arm, the lower control arm 15-series bolts, the lower control arm 25/35-series bolts, the washers with the shoulder facing the arm, the lower control arm retaining nuts, the wheel drive shaft, the torsion bars, the shock absorber lower nut and bolt, the stabilizer shaft links to the lower control arm, and align the vehicle.

You can support the transmission with a transmission jack, remove the nut retaining the transmission mount to the transmission support, the rear of the transmission, the bolts and the nuts retaining the transmission support to the frame, the bolts and the nuts retaining the transmission support to the frame, and the transmission support from the frame.

You can remove the tire and wheel, the stabilizer shaft links from the lower control arm, the shock absorber lower nut and the bolt, the torsion bars, the wheel drive shaft, the lower ball joint retaining nut, the lower ball joint stud from the steering knuckle using J 43631 and J 45851, the lower control arm nuts and the 15-series washers, the lower control arm bolts, the lower control arm nuts, and the 25/35-series washers, the lower control arm bolts, and the lower control arm.

You can inspect the reservoir, clean the reservoir with denatured alcohol, or equivalent, dry the reservoir with non-lubricated, filtered air, lubricate the new seals, install the lubricated seals, the reservoir, place the brake fluid level sensor into the reservoir, remove the master cylinder from the vise, and master cylinder to the vehicle.

You can install the transmission support to the frame, the transmission support to the frame, the bolts, the nuts retaining the transmission support to the frame, the transmission mount to the transmission support, and the nuts, and remove the transmission jack.