2001 Buick Regal A/C Clutch

The procedure is to clamp the J 34992 in a vise, attach the A/C compressor to the holding fixture using the thumb screws, use the J 33027-A to prevent the clutch hub and drive plate assembly from turning, the J 33022 to remove the shaft nut, thread the J 33013-B into the hub, use a wrench to hold the body of the J 33013-B, turn the center screw into the body of the J 33013-B to remove the clutch plate and hub assembly, and remove the shaft key. Retain the shaft key for reassembly.

The procedure is to install the compressor onto the J 41790, the J 33023-A onto the front head of the compressor, remove the compressor clutch plate and hub assembly, the compressor rotor and bearing assembly, mark the clutch coil terminal location, install the J 33025 onto the J 8433, the J 8433 onto the compressor clutch coil, and tighten the center forcing screw J 8433-3 of the compressor pulley puller J 8433 against the puller pilot to remove the compressor clutch coil from the compressor.