2000 GMC Savana 1500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
FAQ for Engine Oil Cooler Repair
Q: How do you remove the oil cooler?
A:
You can remove the air baffle from the vehicle, disconnect the oil cooler lines from the auxiliary oil cooler, and remove the auxiliary oil cooler from the vehicle.
By Bob
GM Specialist
01/11/2022
Q: How do you install the oil cooler?
A:
You can install the auxiliary oil cooler and the air baffle, and connect the oil cooler lines to the vehicle.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How do you remove the thermostat?
A:
You can remove the air cleaner and the duct, the coolant recovery reservoir, the Thermostat housing, and the thermostat.
Q: How to install Thermostat Housing?
A:
You can install the new gaskets, the Thermostat Housing crossover, and the studs and bolts retaining the thermostat housing crossover to the engine, connect the upper radiator hose to the thermostat housing crossover, the by-pass hose to the thermostat housing crossover, the heater hose to the thermostat housing crossover, the electrical connector to the coolant temperature sensor, install the A/C compressor, the stud securing the fuel bleed valve at the thermostat housing, the nut securing the dipstick tubes at the thermostat housing, connect the battery negative cable to the auxiliary battery terminal, the battery negative cable to the battery terminal, refill the engine cooling system, bleed the air from the engine cooling system, install the cap on the surge tank, the air intake duct to the turbocharger, the air cleaner assembly in the vehicle.
Q: How do you remove the water pump?
A:
You can disconnect the battery negative cable, remove the air cleaner.