You can install the new gaskets, the
Thermostat Housing crossover, and the studs and bolts retaining the thermostat housing crossover to the engine, connect the upper radiator hose to the thermostat housing crossover, the by-pass hose to the thermostat housing crossover, the heater hose to the thermostat housing crossover, the electrical connector to the coolant temperature sensor, install the A/C compressor, the stud securing the fuel bleed valve at the thermostat housing, the nut securing the dipstick tubes at the thermostat housing, connect the battery negative cable to the auxiliary battery terminal, the battery negative cable to the battery terminal, refill the engine cooling system, bleed the air from the engine cooling system, install the cap on the surge tank, the air intake duct to the turbocharger, the air cleaner assembly in the vehicle.