< Back ×
My Vehicle Change Vehicle
2000 GMC Safari
< Back to View All
Windows & Components
- Department
- Prices
OEM (Genuine) 2000 GMC Safari Channel
PartNumber: 15769937
Product Specifications- Location: Driver Side
- Other Names: Channel
- Item Dimensions: 22.3 x 2.8 x 2.4 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15041957, 14075575, 15996563
- Part Description: 2000 GMC Safari Channel
Vehicle Fitment- 2000 GMC Safari | Base, SL, SLE, SLT | 6 Cyl 4.3 L GAS
OEM (Genuine) 2000 GMC Safari Channel Asm-Front Side Door Window *Marked Print
PartNumber: 15769938
Product Specifications- Location: Passenger Side
- Other Names: Channel
- Item Dimensions: 21.4 x 4.0 x 1.0 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 14075576, 15996564
- Part Description: 2000 GMC Safari Channel Asm-Front Side Door Window *Marked Print
Vehicle Fitment- 2000 GMC Safari | Base, GT, SL, SLE, SLT, SLX | 4 Cyl 2.5 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 2000 GMC Safari Weatherstrip Asm-Front Side Door Window <Use 1C5K*Marked Print
PartNumber: 15006881
Product Specifications- Location: Passenger Side; Driver Side
- Other Names: Channel, Weatherstrip
- Item Dimensions: 6.0 x 19.0 x 18.7 inches
- Item Weight: 2.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15717457, 15717458
- Part Description: 2000 GMC Safari Weatherstrip Asm-Front Side Door Window <Use 1C5K*Marked Print
Vehicle Fitment- 2000 GMC Safari | Base, GT, SL, SLE, SLT, SLX | 4 Cyl 2.5 L GAS, 6 Cyl 4.3 L GAS
FAQ for Window Channel Repair
Q: What's the installation procedure for the window frame?
A:
The installation procedure is to slide the clip of the channel into the upper channel to install the window run channel to the door, install the door-to-window run channel bolt, then tighten the door-to-window run channel bolt to 9.5 N.m (84 lb in), next install the water deflector and the trim panel.
By Bob
GM Specialist
01/11/2022Q: What's the removal procedure for the window frame?
A:
The removal procedure is to roll the window up completely, remove the trim panel, then use a sharp bladed tool, if needed, to separate the water deflector at the perforations, next remove the door to window run channel bolt, and pull the run channel away from the upper channel (which is part of the door) to remove the window run channel from the door.
By Bob
GM Specialist
01/11/2022