FAQ for Starter Repair
Q: What's the recommended torque for the two starter motor mounting bolts?
A:
The recommended torque is 43 N.m (32 lb-ft).
By BobGM Specialist
02/11/2022 Q: Should I turn off the ignition when connecting or disconnecting the battery cables, the battery charger, or the jumper cables?
A:
Yes, you should. Failure to do so may damage the PCM or other electronic components.
By BobGM Specialist
02/11/2022 Q: What's the recommended torque for the battery-positive cable nut?
A:
The recommended torque is 19 N.m (14 lb-ft).
By BobGM Specialist
02/11/2022 Q: What needs to be ensured when installing the positive battery cable to the starter solenoid?
A:
You should make sure that the inner nut on the solenoid battery terminal must be tightened before the battery cable and the other leads are installed. Failure to do so will result in the solenoid or the solenoid terminal damage.
By BobGM Specialist
02/11/2022 Q: Can I connect the negative charger lead to the housings of other vehicle electrical accessories or equipment?
A:
No, you cannot. The action of the battery charger may damage such equipment.
By BobGM Specialist
02/11/2022 Q: What's the recommended torque for the starter enable relay lead nut?
A:
The recommended torque is 2 N.m (18 lb in).
By BobGM Specialist
02/11/2022 See more FAQs (1)