Part Description: 2000 GMC Safari Mass Air Flow Sensor
More Info
Vehicle Fitment
2000 GMC Safari | All Trims | 6 Cyl 4.3L
$57.26
FAQ for Mass Air Flow Sensor Repair
Q: What should not be done when handling the MAF sensor?
A:
You mustn't drop the MAF sensor, damage the screen located at the air inlet end of the MAF, touch the sensing elements or allow solvents and lubricants to come in contact with the sensing elements.
By Bob
GM Specialist
01/11/2022
Q: What's the recommended torque for the hose clamp that helps attach the MAF sensor to the air cleaner cover?
A:
The recommended torque is 4 N.m (30 lb in).
By Bob
GM Specialist
01/11/2022
Q: What's the recommended torque for the hose clamp which helps attach the air cleaner outlet duct to the MAF sensor?
A:
The recommended torque is 4 N.m (30 lb in).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What's the proper way to install the throttle body?
A:
The proper way is to clean the gasket surface on the intake manifold, install the Throttle Body assembly with a new seal, install the throttle body assembly retaining studs, then install the air cleaner outlet duct adapter stud.
Q: What's the removal procedure for the manifold absolute pressure (MAP) sensor?
A:
The removal procedure is to disconnect the negative battery cable, remove the engine cover, then disconnect the MAP Sensor harness connector, remove the MAP sensor and discard the MAP sensor grommet.
Q: What's the installation procedure for the air filter element?
A:
The installation procedure is to insert the air cleaner element into the air cleaner tub, install the air cleaner cover, and fasten the air cleaner cover retainer clips.