2000 GMC Safari | Base, SL, SLE, SLT, SLX | 6 Cyl 4.3 L GAS
FAQ for Hood Release Cable Repair
Q: How to disconnect the cable from the primary latch?
A:
You will need to use a suitable tool to pry the cable clip open to allow the removal of the cable and then pry the cable housing from the latch.
By Bob
GM Specialist
01/11/2022
Q: What's the removal procedure for the hood release lever?
A:
The removal procedure is to remove the left cowl side trim panel, remove the left cowl side trim panel, then remove the hood release cable from the hood latch.
By Bob
GM Specialist
01/11/2022
Q: What's the recommended torque for the screws that retain the cable to the cowl side panel?
A:
The recommended torque is 2 N.m (18 lb in).
By Bob
GM Specialist
01/11/2022
Q: What's the installation procedure for the hood release lever?
A:
The installation procedure is to install the hood release cable to the hood latch, install the screws that retain the hood release lever to the cowl side trim panel and tighten the hood release lever screws to 8 N.m (71 lb in), then install the left cowl side trim panel.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What's the installation procedure for the secondary hood latch?
A:
The installation procedure is to install the secondary Hood Latch to the hood, position the tab into the slot, then install the hood latch bolt and tighten it to 27 N.m (20 lb-ft).