2000 GMC C3500 Windshield Wiper Motors

You should install the wiper motor onto the vehicle, install the washer, the spacer, and the nut on the wiper motor drive shaft, install the nut in the liftglass, install the bolt to the wiper motor, connect the electrical connector, install the cover onto the wiper motor, install four retainers in the cover and install the wiper arm.

You should remove the wiper arm, remove four retainers from the wiper motor cover, remove the cover from the wiper motor, disconnect the electrical connector from the wiper motor, remove the bolt from the wiper motor, remove the nut from the liftglass, remove the nut, the spacer, and the washer from the wiper motor drive shaft and remove the wiper motor from the vehicle.

You should install the wiper motor on the vehicle, the three bolts, install the drive link brackets to the wiper motor crank arm with the right side linkage closest to the wiper motor, connect the electrical connector to the wiper motor, install the air inlet grille panel and install the wiper arms.

You should remove the wiper arms and the air inlet grille panel, disconnect the electrical connector from the motor, loosen the nuts attaching the drive link brackets to the crank arm, remove the brackets from the wiper motor crank arm and remove the three bolts and the wiper motor from the vehicle.

You should disconnect the electrical connector from the wiper motor, remove the three screws and the wiper motor cover and remove the module from the wiper motor.