Notes: All Models; Right;All Models; Right Side; Door Lock & Window; All Models; All
Location: Passenger Side
Other Names: Control Switch, Lock Switch, Switch, Window Switch
Item Dimensions: 6.2 x 3.2 x 3.1 inches
Item Weight: 0.70 Pounds
Fitment Type: Direct Replacement
Part Description: 2000 GMC C3500 Switch Asm-Door Lock & Side Window
More Info
Vehicle Fitment
2000 GMC C3500 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
FAQ for Window Switch Repair
Q: How do I install the power window switch?
A:
You should connect the power accessory electrical connectors to the switch, install the switch to the door trim panel and snap the switch in place.
By Bob
GM Specialist
01/11/2022
Q: How do I remove the power window switch?
A:
You should remove the switch mounting panel, pry the door power window switch from the door trim panel and disconnect the power accessory electrical connectors from the switch.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How do I install the Window Regulator Handle-Rear Door?
A:
You should install the bearing plate to the door, install the window regulator handle by installing the clip onto the handle, inserting the handle onto the window regulator shaft so that the handle points toward the front of the door and push the handle until the clip engages the window regulator shaft.
Q: What is the recommended torque for installing the inner panel bolts?
A:
The recommended torque is 4 N.m (35 lb in).
Q: How do I remove the door window regulator (Power)?
A:
You should remove the trim panel, the water deflector, and the inner mounting panel assembly, drill out the front and rear rivets securing the regulator to the door inner panel and remove the regulator from the inner panel.