2000 GMC C3500 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
Part Description: 2000 GMC C3500 Motor, Rear Side Door Window Regulator
More Info
Vehicle Fitment
2000 GMC C3500 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
FAQ for Window Motor Repair
Q: What is the recommended torque for installing the inner panel bolts?
A:
The recommended torque is 4 N.m (35 lb in).
By Bob
GM Specialist
01/11/2022
Q: Where I should remove the lock rods from?
A:
From the lock handle, the lock lever, and the lock rod guides.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How do I remove the power window switch?
A:
You should remove the switch mounting panel, pry the door power Window Switch from the door trim panel and disconnect the power accessory electrical connectors from the switch.
Q: How do I install the Window Regulator Handle-Rear Door?
A:
You should install the bearing plate to the door, install the window regulator handle by installing the clip onto the handle, inserting the handle onto the window regulator shaft so that the handle points toward the front of the door and push the handle until the clip engages the window regulator shaft.
Q: How do I remove the door window regulator (Power)?
A:
You should remove the trim panel, the water deflector, and the inner mounting panel assembly, drill out the front and rear rivets securing the regulator to the door inner panel and remove the regulator from the inner panel.