Part Description: 2000 GMC C3500 Oe Solutions Washer Fluid Reservoir
More Info
Vehicle Fitment
2000 GMC C3500 | All Trims | All Engines
$36.50
FAQ for Washer Reservoir Repair
Q: How do I remove the windshield washer reservoir?
A:
You should remove the auxiliary battery and battery tray and two bolts. Then you should disconnect the hose(s) from the washer pump(s) and disconnect the electrical connector(s) from the washer pump(s). Lastly, you should remove the washer solvent container from the vehicle.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for installing the link assembly to the bolts?
A:
The recommended torque is 6 N.m (53 lb in).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How do I install the windshield washer pump?
A:
You should install the Washer Pump(s) in the washer solvent container and install the washer solvent container on the vehicle.
Q: How do I install the wiper blade element?
A:
You should insert the open end of the Wiper Blade element into the bottom claws of the wiper blade and guide the wiper blade element through the wiper blade claw sets. Then you should engage the bottom claw of the wiper blade into the notches in the wiper blade element and install the wiper blade onto the wiper arm.
Q: How do I remove the Wiper Arm-Rear?
A:
You should disconnect the washer hose, lift the wiper arm from the windshield, disengage the retaining latch with a screwdriver, disengage the washer hose and grommet from the liftgate and remove the wiper arm from the wiper motor drive shaft.