2000 GMC C3500 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
Part Description: 2000 GMC C3500 Arm Kit, Steering Linkage Idler
More Info
Vehicle Fitment
2000 GMC C3500 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
FAQ for Pitman Arm Repair
Q: What tools are required to replace Pitman Arm?
A:
J24319-01 Universal Steering Linkage Puller, J 29107-A Universal Pitman Arm Puller, J 6632-01 Pitman Arm Puller, and J 29194 Steering Linkage Installer (14 mm).
By Bob
GM Specialist
02/11/2022
Q: What is the recommended torque when installing the pitman arm nut to the Pitman arm ball stud?
A:
The recommended torque is 47 Nm (35 ft. lbs.).
By Bob
GM Specialist
02/11/2022
FAQ for Other Repair Info
Q: How do I remove the Tie Rod Adjuster?
A:
You should raise and support the vehicle, remove the outer tie rod, loosen the tie rod adjuster clamp bolt at the inner Tie Rod End of the tie rod adjuster and remove the inner tie rod adjuster from the inner tie rod.
Q: What tools are required to replace the drag link?