Part Description: 2000 GMC C3500 Panel, Front Floor
More Info
Vehicle Fitment
2000 GMC C3500 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
2000 GMC C3500 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
2000 GMC C3500 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
FAQ for Floor Pan Repair
Q: How do I install the body rear inner panel carpet?
A:
You should install the carpet panel, the carpet retainer screws, the side rears lower panel, and the rear window lower garnish molding.
By Bob
GM Specialist
29/10/2022
Q: What should be noted when serving the front floor panel carpet?
A:
To avoid personal injury or vehicle damage when you repair or replace the carpet, you should use the same thickness and material size as the original installation. Always return the carpet to the original location.
By Bob
GM Specialist
29/10/2022
Q: How do I remove the body rear inner panel carpet?
A:
You should remove the rear window lower garnish molding, the side rear trim panel, the carpet retainers, the carpet panel, and the carpet panel from the vehicle.
By Bob
GM Specialist
29/10/2022
FAQ for Other Repair Info
Q: How do I install the windshield washer pump?
A:
You should install the Washer Pump(s) in the washer solvent container and install the washer solvent container on the vehicle.
Q: How do I remove the power window switch?
A:
You should remove the switch mounting panel, pry the door power Window Switch from the door trim panel and disconnect the power accessory electrical connectors from the switch.
Q: How do I install the wiper blade element?
A:
You should insert the open end of the Wiper Blade element into the bottom claws of the wiper blade and guide the wiper blade element through the wiper blade claw sets. Then you should engage the bottom claw of the wiper blade into the notches in the wiper blade element and install the wiper blade onto the wiper arm.