Other Names: Mount, Rear Mount, Transmission Mount
Item Dimensions: 10.1 x 5.3 x 5.5 inches
Item Weight: 4.10 Pounds
Fitment Type: Direct Replacement
Replaces: 15022551, 15683966, 15750514
Part Description: 2000 GMC C3500 Rear Mount
More Info
Vehicle Fitment
2000 GMC C3500 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
2000 GMC C3500 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
Other Names: Motor Mount Spacer, Mount Bracket Spacer, Spacer
Item Dimensions: 5.3 x 5.3 x 0.4 inches
Item Weight: 0.60 Pounds
Fitment Type: Direct Replacement
Part Description: 2000 GMC C3500 Spacer-Engine Mount Bracket
More Info
Vehicle Fitment
2000 GMC C3500 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
Other Names: Mount Bracket, Transmission Mount Bracket
Item Dimensions: 9.2 x 5.3 x 2.6 inches
Item Weight: 2.10 Pounds
Fitment Type: Direct Replacement
Part Description: 2000 GMC C3500 Bracket-Trans Mount
More Info
Vehicle Fitment
2000 GMC C3500 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
2000 GMC C3500 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 5.7 L GAS, 8 Cyl 7.4 L GAS
FAQ for Engine Mount Repair
Q: How do I remove the engine mount?
A:
You should raise the engine only enough in order to permit the removal of the engine mounting, remove the engine mounting through-bolt and nut, the mounting assembly bolts, nuts, and washers, and the mounting assembly.
By Bob
GM Specialist
01/11/2022
Q: How do I install the engine mount?
A:
You should install the mounting assembly, the mounting assembly bolts, nuts, and washers and the engine mounts through-bolt and nut.
By Bob
GM Specialist
01/11/2022
Q: What should we know about the engine mount inspection front engine mount?
A:
When raising or supporting the engine for any reason, you can not use a jack under the oil pan, any sheet metal, or the crankshaft pulley. Due to the small clearance between the oil pan and the oil pump screen, jacking against the oil pan may cause the pan to be bent against the pump screen.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the recommended torque when installing the wire harness bracket to the generator and drive belt tensioner mounting bracket?