< Back ×
My Vehicle Change Vehicle
2000 GMC C3500
< Back to View All
A/C & Heating
- Department
- Brands
- Prices
OEM (Genuine) 2000 GMC C3500 Evaporator
PartNumber: 52464036
Product Specifications- Notes: All Models; All
- Other Names: Evaporator, Evaporator Core
- Item Dimensions: 21.7 x 17.6 x 8.6 inches
- Item Weight: 7.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 GMC C3500 Evaporator
Vehicle Fitment- 2000 GMC C3500 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
$187.43 MSRP:$393.80You Save: $206.37 (53%)
Four Seasons® A C Evaporator Core for 2000 GMC C3500
PartNumber: 54598Product Specifications- Notes: Evaporator replacement for this application may require considerable time, specialty tools, and training.
- Core Depth Fraction: 2-15/16; 2-7/8
- Core Depth MM: 73.025
- Core Height Fraction: 9-1/2; 9-3/8
- Core Height MM: 238.125; 241.300
- Core Width Fraction: 11-1/2; 11-7/16
- Core Width MM: 290.512
- Depth: 2.875; 2.896; 2.9375
- Height: 9.375; 9.500
- Material: Aluminum
- O-Ring A Number/Desc: [24608] / Green O-Ring
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24612] / Green O-Ring
- O-Ring B Quantity: 1
- Outlet Fitting Outside Diameter: No. 12
- UPC: 096361545984
- Width: 11.4375
- Part Description: 2000 GMC C3500 A C Evaporator Core
Vehicle Fitment- 2000 GMC C3500 | All Trims | All Engines
$63.23
OEM (Genuine) 2000 GMC C3500 Evaporator Case
PartNumber: 52481670
Product Specifications- Notes: Lower
- Item Dimensions: 8.2 x 16.3 x 10.6 inches
- Item Weight: 1.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 3090889, 03090889
- Part Description: 2000 GMC C3500 Evaporator Case
Vehicle Fitment- 2000 GMC C3500 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
$46.11 MSRP:$83.48You Save: $37.37 (45%)
OEM (Genuine) 2000 GMC C3500 Case, Shroud
PartNumber: 52461802
Product Specifications- Other Names: Evaporator Case, Lower Case, Shroud
- Item Dimensions: 19.5 x 18.5 x 10.5 inches
- Item Weight: 1.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 3090350, 03090350
- Part Description: 2000 GMC C3500 Case, Shroud
Vehicle Fitment- 2000 GMC C3500 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 2000 GMC C3500 Case, A/C Evap
PartNumber: 52470825
Product Specifications- Notes: Upper
- Other Names: Case Assembly, Evaporator Case, Upper Case
- Item Dimensions: 21.7 x 17.8 x 11.6 inches
- Item Weight: 3.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 52478210, 52478211, 52465982
- Part Description: 2000 GMC C3500 Case, A/C Evap
Vehicle Fitment- 2000 GMC C3500 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
FAQ for A/C Evaporator Core Repair
Q: How do I install the evaporator core---auxiliary (4-Door)?
A:
You should install the evaporator core, the pipe insulator, the clips, the screws, and the auxiliary case, connect the auxiliary refrigerant hoses to the auxiliary evaporator, connect the electrical connectors and install the right rear quarter trim panel.
By Bob
GM Specialist
28/10/2022Q: What should we know about the Heating, A/C-Passenger Side of the Vehicle Colder/Warmer?
A:
You should use a battery terminal puller to remove the wiper arm and rock the wiper arm back and forth to loosen the arm from the drive shaft.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque when tightening the screws?
A:
The recommended torque is 1.9 N.m (17 lb in).
By Bob
GM Specialist
28/10/2022Q: Under what conditions you should operate the blower motor for a 10-minute period?
A:
Set the blower speed to a high position, set the recirculation mode, and set the temperature control on maximum heat.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque when tightening the module mounting screw?
A:
The recommended torque is 11 N.m (97 lb in).
By Bob
GM Specialist
28/10/2022Q: How do I remove the evaporator core---auxiliary (4-Door)?
A:
You should recover the refrigerant, remove the rear quarter interior trim, disconnect the auxiliary refrigerant hoses, and the electrical connectors, remove the screws securing the case to the rear quarter sheet metal, remove the blower housing, the 10 case clips, separate the case halves, remove and the evaporator core.
By Bob
GM Specialist
28/10/2022Q: What should be noticed in odor correction?
A:
You should drill a 3 mm (1/8 in) hole in a location that does not interfere with the blower motor, the evaporator, or any operating part in the system.
By Bob
GM Specialist
28/10/2022See more FAQs (2)