< Back ×
My Vehicle Change Vehicle
2000 Chevrolet Venture
< Back to View All
Wipers & Washers
- Department
- Location
- Brands
- Prices
OEM (Genuine) 2000 Chevrolet Venture Wiper Motor
PartNumber: 12368685
Product Specifications- Other Names: Wiper Motor
- Item Dimensions: 9.8 x 9.6 x 6.3 inches
- Item Weight: 4.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12365393, 22144768
- Part Description: 2000 Chevrolet Venture Wiper Motor
Vehicle Fitment- 2000 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
$277.67 MSRP:$523.92You Save: $246.25 (48%)
Cardone Reman® Remanufactured Wiper Motor for 2000 Chevrolet Venture
PartNumber: 40-1026Product Specifications- Notes: Motor without Washer Pump
- E-Waste: Yes
- Mounting Hole Quantity: 3
- Mounting Type: Direct Bolt
- Package Contents: Wiper Motor, Instruction Manual
- Product Condition: Remanufactured
- Product Packing Weight: 2.5 lbs
- Terminal Type: Blade
- Washer Pump Included: No
- Part Description: 2000 Chevrolet Venture Remanufactured Wiper Motor
Vehicle Fitment- 2000 Chevrolet Venture | All Trims | All Engines
$54.65
Cardone Reman® Remanufactured Wiper Motor for 2000 Chevrolet Venture
PartNumber: 40-1025Product Specifications- Notes: Motor without Washer Pump
- E-Waste: Yes
- Mounting Hole Quantity: 3
- Mounting Type: Direct Bolt
- Package Contents: Wiper Motor, Instruction Manual
- Product Condition: Remanufactured
- Product Packing Weight: 3.38 lbs
- Terminal Type: Blade
- Washer Pump Included: No
- Part Description: 2000 Chevrolet Venture Remanufactured Wiper Motor
Vehicle Fitment- 2000 Chevrolet Venture | All Trims | All Engines
$50.86
WAI Global® Front Windshield Wiper Motor for 2000 Chevrolet Venture
PartNumber: WPM1025Product Specifications- UPC: 609843963031
- Part Description: 2000 Chevrolet Venture Front Windshield Wiper Motor
Vehicle Fitment- 2000 Chevrolet Venture | All Trims | All Engines
$48.20
WAI Global® Rear Back Glass Wiper Motor for 2000 Chevrolet Venture
PartNumber: WPM1026Product Specifications- UPC: 609843963048
- Part Description: 2000 Chevrolet Venture Rear Back Glass Wiper Motor
Vehicle Fitment- 2000 Chevrolet Venture | All Trims | All Engines
OEM (Genuine) 2000 Chevrolet Venture Motor & Bracket
PartNumber: 19329716
Product Specifications- Other Names: Motor Bracket, Wiper Motor
- Item Dimensions: 14.4 x 10.1 x 6.7 inches
- Item Weight: 3.30 Pounds
- Replaced by: 19332589
- Part Description: 2000 Chevrolet Venture Motor & Bracket
Vehicle Fitment- 2000 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
FAQ for Windshield Wiper Motors Repair
Q: What is the recommended torque for the wiper motor drive shaft nut?
A:
The recommended torque is 6 N.m (53 LB IN).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the screws retaining the wiper motor cover to the wiper motor?
A:
The recommended torque is 2 N.m (18 LB IN).
By Bob
GM Specialist
01/11/2022Q: How to install the Wiper Motor Crank Arm?
A:
First, you should install the crank arm, the crank arm cover, the drive link, and the wiper system module cover. In addition, you should check the gap between the crank arm and the tab. Next, you should operate the wipers and check for proper operation.
By Bob
GM Specialist
01/11/2022Q: How to install the wiper motor cover?
A:
You should install the wiper motor cover and the wiper motor. In addition, you should operate the wipers and check them for proper operation.
By Bob
GM Specialist
01/11/2022Q: How to remove the wiper motor - rear?
A:
You should remove the nut, the washer, the liftgate trim panel, the wiper motor, the wiper motor cover, the circuit board, the bracket, the insulator, the seal, and the spacer. In addition, you should disconnect the electrical connector from the wiper motor.
By Bob
GM Specialist
01/11/2022Q: How to remove the wiper motor?
A:
You should remove the screws, the crank arm, and the wiper motor. In addition, you should disconnect the electrical connector from the wiper motor.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the drive link screws?
A:
The recommended torque is 5 N.m (44 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the screws retaining the wiper motor to the liftgate?
A:
The recommended torque is 5.5 N.m (49 LB IN).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the screws retaining the wiper motor to the wiper drive system module?
A:
The recommended torque is 7 N.m (62 LB IN).
By Bob
GM Specialist
01/11/2022Q: How to install the wiper motor?
A:
First, you should install the wiper motor, the crank arm, and the screws. In addition, you should connect the electrical connector to the wiper motor. Next, you should operate the wipers to check for operation.
By Bob
GM Specialist
01/11/2022See more FAQs (8)