< Back ×
My Vehicle Change Vehicle
2000 Chevrolet Venture
< Back to View All
Wipers & Washers
- Department
- Prices
OEM (Genuine) 2000 Chevrolet Venture Wiper Arm
PartNumber: 10430077
Product Specifications- Location: Driver Side
- Other Names: Wiper Arm
- Item Dimensions: 3.5 x 30.1 x 1.1 inches
- Item Weight: 1.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10293950, 10404073, 10417085, 10424344
- Part Description: 2000 Chevrolet Venture Wiper Arm
Vehicle Fitment- 2000 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
$79.91 MSRP:$126.90You Save: $46.99 (38%)OEM (Genuine) 2000 Chevrolet Venture Wiper Arm
PartNumber: 15283006
Product Specifications- Location: Passenger Side
- Other Names: Wiper Arm
- Item Dimensions: 30.1 x 4.7 x 1.6 inches
- Item Weight: 1.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10424343, 10417084, 10404072, 10293949
- Part Description: 2000 Chevrolet Venture Wiper Arm
Vehicle Fitment- 2000 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
OEM (Genuine) 2000 Chevrolet Venture Rear Arm
PartNumber: 10323561
Product Specifications- Notes: All Models
- Other Names: Rear Arm, Wiper Arm
- Item Dimensions: 13.3 x 1.6 x 1.1 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22143294, 12487604, 88958132, 10446627
- Part Description: 2000 Chevrolet Venture Rear Arm
Vehicle Fitment- 2000 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
FAQ for Windshield Wiper Arms Repair
Q: What is the recommended torque for the wiper motor spindle nut?
A:
The recommended torque is 25 N.m (18.4 LB-FT).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the wiper transmission drive shaft nut?
A:
The recommended torque is 48 N.m (35 LB-FT).
By Bob
GM Specialist
01/11/2022Q: How to install the wiper arm blade?
A:
First, you should insert the hood of the wiper arm through the opening in the wiper blade and position the wiper blade pivot in the inside radius of the wiper arm hood. Next, you should pull the wiper blade pivot into the wiper arm hood. Finally, you should operate the wipers and check them for proper operation.
By Bob
GM Specialist
01/11/2022Q: How to remove the wiper arm?
A:
First, you should turn the ignition off and disconnect the washer hose. Next, you should remove the cover, the nut, the wiper arm, and the wiper blade. Finally, you should clean the knurls of the wiper transmission drive shaft.
By Bob
GM Specialist
01/11/2022Q: How to install the wiper arm?
A:
First, you should install the wiper blade, the wiper arm, the nut, the cover, and the washer hose. Next, you should operate the wipers and check for proper operation.
By Bob
GM Specialist
01/11/2022Q: How to install the wiper arm - rear?
A:
You should install the wiper blade, the wiper arm, the nut, and the cap. In addition, you should remove the mark from the rear window and operate the rear wiper/washer system to check for proper operation.
By Bob
GM Specialist
01/11/2022Q: How to remove the wiper arm blade?
A:
First, you should turn the ignition switch to the ACCY position and set the wiper switch to the pulse position. Next, you should turn the ignition off, remove the wiper blade from the inside radius of the wiper arm, and then bring the wiper arm out through the opening in the wiper blade.
By Bob
GM Specialist
01/11/2022Q: How to remove the wiper arm - rear?
A:
You should mark the position of the wiper blade on the rear window and remove the following parts: the cap, the nut, the wiper arm, and the wiper blade.
By Bob
GM Specialist
01/11/2022See more FAQs (3)