< Back ×
My Vehicle Change Vehicle
2000 Chevrolet Venture
< Back to View All
Air Filters & Intake Systems
- Department
- Prices
OEM (Genuine) 2000 Chevrolet Venture Throttle Body Assembly
PartNumber: 12595275
Product Specifications- Notes: All Models; 3.4l
- Other Names: Throttle Body
- Item Dimensions: 7.8 x 5.7 x 5.9 inches
- Item Weight: 2.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 17113631
- Part Description: 2000 Chevrolet Venture Throttle Body Assembly
Vehicle Fitment- 2000 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
FAQ for Throttle Body Repair
Q: What is the recommended torque for the throttle body retaining nuts and bolts?
A:
The recommended torque is 28 N.m (21 lb-ft).
By Bob
GM Specialist
02/11/2022Q: What should be noted when installing the Accelerator Controls Cable?
A:
You should be careful not to route flexible components (hoses, wires, conduits, etc.) within 50 mm (2 in) of moving parts unless flexible components can be securely fastened.
By Bob
GM Specialist
02/11/2022Q: How to remove the Throttle Body?
A:
First, you should drain the coolant and disconnect the following parts: the Intake Air Temperature (IAT) sensor electrical connector, the breather tube, the Idle Air Control (IAC) valve electrical connector, the Throttle Position (TP) sensor electrical connector, the accelerator controls cable, the cruise control cable, the throttle body coolant bypass hoses, and the heater pipe nut. In addition, the air intake tube, the accelerator control cable bracket, the nuts holding the throttle body to the intake manifold, and the throttle body assembly should be removed.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the accelerator cable bracket nuts?
A:
The recommended torque is 10 Nm (89 LB IN).
By Bob
GM Specialist
02/11/2022Q: How to remove the Accelerator Controls Cable Bracket?
A:
First, you should disconnect the accelerator cable cross slug and the cruise control cable. Next, the accelerator cable, the nuts/bolts holding the accelerator cable bracket to the throttle body, and the accelerator cable bracket should be removed.
By Bob
GM Specialist
02/11/2022Q: How to remove the Accelerator Controls Cable?
A:
First, you should remove the left instrument panel sound insulator, the accelerator cable shield, and the accelerator cable. Next, you should disconnect the accelerator cable.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the accelerator cable bracket bolts?
A:
The recommended torque is 13 Nm (115 LB IN).
By Bob
GM Specialist
02/11/2022Q: How to install the Accelerator Controls Cable?
A:
First, you should install and connect the accelerator cable. In addition, you should install the snap retainer as well as the left instrument panel sound insulator. Next, you should inspect and check for complete throttle opening and closing positions.
By Bob
GM Specialist
02/11/2022Q: How to install the Accelerator Controls Cable Bracket?
A:
First, you should install the accelerator cable bracket. Next, you should connect the cruise control cable as well as the accelerator cable cross slug.
By Bob
GM Specialist
02/11/2022See more FAQs (4)