Part Description: 2000 Chevrolet Venture OE Type Engine Coolant Thermostat
More Info
Vehicle Fitment
2000 Chevrolet Venture | All Trims | 6 Cyl 3.4L
FAQ for Thermostat Repair
Q: How to install the Thermostat?
A:
First, you should install the thermostat, the thermostat housing, the radiator hose, and the air cleaner and duct assembly. Next, you should fill the cooling system and inspect it for leaks.
By Bob
GM Specialist
01/11/2022
Q: How to remove the Thermostat?
A:
You should drain the coolant and remove the following parts: the air cleaner and duct assembly, the radiator hose, the thermostat housing, and the thermostat. In addition, you should clean the mating surfaces.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the thermostat housing bolts?
A:
The recommended torque is 25 N.m (18 ft. lbs.).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to install the Water Pump?
A:
You should install the Water Pump gasket, the water pump, the water pump pulley, and the drive belt.
Q: How to remove the Coolant Reservoir?
A:
You should remove the reservoir hose clamp, the mounting clips, and the Coolant Reservoir. In addition, you should clean the coolant reservoir with soap and water.
Q: How to install the Radiator Cooling Fan Motor?
A:
You should install the Cooling Fan Motor, the cooling fan motor screws, the cooling fan motor electrical connector, the cooling fan, and the cooling fans with the cooling fan shroud.