Part Description: 2000 Chevrolet Venture Park/Marker Lamp
More Info
Vehicle Fitment
2000 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
FAQ for Side Marker Lights Repair
Q: How to remove the Marker Lamp?
A:
First, you should open the hood. Next, you should remove the wiring nut and the front park/turn signal/side marker lamp. Then, you should unscrew the bulb socket and pull the bulb from the socket.
By Bob
GM Specialist
01/11/2022
Q: How to install the Marker Lamp?
A:
First, you should press the bulb into the socket. Next, you should install the socket, the front park/turn signal/side marker lamp, and the wiring nut. Finally, you should close the hood.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to remove the starter motor?
A:
You should disconnect the battery ground (negative) cable and remove the following parts: the Starter motor BAT terminal nut, the electrical leads, the starter motor S terminal nut, the torque converter cover, and the starter motor.
Q: How to install the Body Control Module?
A:
You should connect the electrical to the Body Control Module, align the tabs on the body control module, and install the left-side instrument panel insulator. Next, you should connect the battery negative cable and set up the BCM customized options.
Q: How to remove the Cruise Control Module?
A:
You should remove the cruise control cable and disconnect the electrical connector. In addition, the mounting bracket bolt and the Cruise Control Module should also be removed.