< Back ×
My Vehicle Change Vehicle
2000 Chevrolet Venture
< Back to View All
Power Steering Lines & Hoses
- Department
- Brands
- Prices
OEM (Genuine) 2000 Chevrolet Venture Pressure Hose
PartNumber: 26068759
Product Specifications- Notes: All Models; W/O AWD
- Other Names: Power Steering Pressure Hose, Pressure Hose
- Item Dimensions: 21.9 x 22.6 x 5.8 inches
- Item Weight: 1.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Venture Pressure Hose
Vehicle Fitment- 2000 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
$105.00 MSRP:$173.81You Save: $68.81 (40%)
Gates® Power Steering Pressure Line Hose Assembly for 2000 Chevrolet Venture
PartNumber: 367730Product Specifications- End 1 Diameter: 16 mm
- End 1 Type: Male O-Ring
- End 2 Diameter: 18 mm
- End 2 Diameter (mm): 18 mm
- End 2 Type: Male O-Ring
- Length: 67.5"
- Switch Port: Without Switch Port
- UPC: 072053560138
- Part Description: 2000 Chevrolet Venture Power Steering Pressure Line Hose Assembly
Vehicle Fitment- 2000 Chevrolet Venture | All Trims | 6 Cyl 3.4L
$40.95
Gates® Power Steering Return Line Hose Assembly From Gear for 2000 Chevrolet Venture
PartNumber: 370330Product Specifications- Notes: w/Cooler
- End 1 Diameter: 16 mm
- End 1 Type: Male O-Ring
- Length: 129"
- UPC: 072053560176
- Part Description: 2000 Chevrolet Venture Power Steering Return Line Hose Assembly From Gear
Vehicle Fitment- 2000 Chevrolet Venture | All Trims | 6 Cyl 3.4L
OEM (Genuine) 2000 Chevrolet Venture Hose - P/S Fluid Reservoir Inlet
PartNumber: 26075225
Product Specifications- Notes: All Models; W/O AWD
- Item Dimensions: 6.6 x 21.6 x 1.3 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Venture Hose - P/S Fluid Reservoir Inlet
Vehicle Fitment- 2000 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
OEM (Genuine) 2000 Chevrolet Venture Pipe Kit, Steering Gear(Long)
PartNumber: 26045506
Product Specifications- Notes: All Models; W/O AWD; Right
- Location: Passenger Side
- Other Names: Line, Line Kit, Pipe Kit, Pressure Line
- Item Dimensions: 19.9 x 6.2 x 2.0 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Venture Pipe Kit, Steering Gear(Long)
Vehicle Fitment- 2000 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
Gates® Power Steering Return Line Hose Assembly Cooler To Reservoir for 2000 Chevrolet Venture
PartNumber: 352928Product Specifications- End 1 Diameter: 0.375"
- End 1 Type: Beaded Tube
- End 2 Type: I.D. Hose
- Length: 26.75"
- UPC: 770075747055
- Part Description: 2000 Chevrolet Venture Power Steering Return Line Hose Assembly Cooler To Reservoir
Vehicle Fitment- 2000 Chevrolet Venture | All Trims | 6 Cyl 3.4L
OEM (Genuine) 2000 Chevrolet Venture Pipe Kit, Steering Gear(Short)
PartNumber: 26045505
Product Specifications- Notes: All Models; W/O AWD; Left
- Location: Driver Side
- Other Names: Line, Line Kit, Pipe Kit, Pressure Line
- Item Dimensions: 12.5 x 4.0 x 4.1 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Venture Pipe Kit, Steering Gear(Short)
Vehicle Fitment- 2000 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
OEM (Genuine) 2000 Chevrolet Venture Shield-Steering Gear Heat
PartNumber: 10259200Product Specifications- Item Dimensions: 7.8 x 5.1 x 1.8 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10445224
- Part Description: 2000 Chevrolet Venture Shield-Steering Gear Heat
Vehicle Fitment- 2000 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
FAQ for Power Steering Hose Repair
Q: How to install the P/S Return Line?
A:
You should install the inlet hose, the right-side engine splash shield, and the drive belt. In addition, you should fill the power steering fluid reservoir and bleed the power steering system.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the power steering gear inlet hose fitting?
A:
The recommended torque is 27 N.m (20 ft-lbs.).
By Bob
GM Specialist
02/11/2022Q: How to remove the P/S Cooler Pipe/Hose?
A:
You should install the drain pan and remove the following parts: the return hose, the intermediate shaft, the frame rear bolts, the power steering gear heat shield, the power steering gear hose clip, the cooler pipe, the cooler pipe retainer, and the cooler pipe.
By Bob
GM Specialist
02/11/2022Q: How to remove the P/S Pressure Hose?
A:
You should install the drain pan and remove the following parts: the intermediate shaft, the frame rear bolts, the power steering gear heat shield, the power steering gear hose clip, the inlet hose, and the drive belt.
By Bob
GM Specialist
02/11/2022Q: What should be noted when removing the P/S Pressure Hose?
A:
You should make sure that the intermediate shaft is disconnected from the rack and pinion stub shaft.
By Bob
GM Specialist
02/11/2022Q: How to remove the P/S Return Line?
A:
You should install the drain pan and remove the following parts: the right-side engine splash shield, the return hose, the drive belt, and the inlet hose.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the cooler pipe retainer bolt/screw?
A:
The recommended torque is 10 N.m (89-inch lbs.).
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the power steering gear cooler pipe fitting?
A:
The recommended torque is 27 N.m (20 ft-lbs.).
By Bob
GM Specialist
02/11/2022See more FAQs (3)