< Back ×
My Vehicle Change Vehicle
2000 Chevrolet Venture
< Back to View All
Door Handles, Locks & Related Parts
- Department
- Prices
OEM (Genuine) 2000 Chevrolet Venture Gate Asm-Lift
PartNumber: 15784021
Product Specifications- Other Names: Lift Gate
- Item Dimensions: 73.3 x 12.9 x 53.9 inches
- Item Weight: 79.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 89044563, 12369212
- Part Description: 2000 Chevrolet Venture Gate Asm-Lift
Vehicle Fitment- 2000 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
FAQ for Liftgates Repair
Q: What should be noted when cleaning excess urethane adhesive from the body?
A:
You should be careful not to direct a hard stream of high-pressure water to the freshly urethane adhesive.
By Bob
GM Specialist
01/11/2022Q: What should you do before cutting out a stationary window?
A:
You should apply a double layer of masking tape around the perimeter of the painted surfaces and the inner trim of the window.
By Bob
GM Specialist
01/11/2022Q: What should be noted when cleaning around the edge of the inside surface of the rear window?
A:
You should be careful not to apply the primer to the existing bead of the urethane adhesive.
By Bob
GM Specialist
01/11/2022Q: How to install the Liftgate Handle?
A:
You should install the liftgate latch cable, the liftgate handle retaining bolts, the license plate lamp sockets, and the liftgate trim panel.
By Bob
GM Specialist
01/11/2022Q: How to install the Trim Panel - Liftgate?
A:
First, you should align the liftgate trim panel studs to the holes in the liftgate and install the upper edge of the liftgate trim panel to the top center of the liftgate. Next, you should secure the trim panel retainers, install the liftgate pull strap, and then close the liftgate.
By Bob
GM Specialist
01/11/2022Q: How to remove the Handle - Liftgate?
A:
You should remove the liftgate trim panel, the license plate lamp sockets, the liftgate handle nuts, the liftgate latch cable, and the liftgate handle.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the liftgate handle retaining bolts?
A:
The recommended torque is 10 N.m (89 LB IN).
By Bob
GM Specialist
01/11/2022Q: How to remove the Pull Strap- Liftgate?
A:
First, you should open the liftgate. Next, you should remove the pull strap retaining screws as well as the pull strap.
By Bob
GM Specialist
01/11/2022Q: How to remove the Trim Panel - Liftgate?
A:
First, you should open the liftgate and remove the liftgate pull strap. Next, you should release the liftgate panel retainers and then remove the trim panel.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the pull strap retaining screws?
A:
The recommended torque is 2 N.m (18 LB IN).
By Bob
GM Specialist
01/11/2022See more FAQs (6)