FAQ for Engine Mount Repair
Q: What is the recommended torque for the engine mount strut nut?
A:
The recommended torque is 48 N.m (35 ft. lbs.).
By BobGM Specialist
01/11/2022 Q: What should you do before replacing the engine mount?
A:
You should verify that the source of the fluid is the engine mount, not the engine or accessories.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the engine mount upper nuts?
A:
The recommended torque is 47 Nm (35 ft. lbs.).
By BobGM Specialist
01/11/2022 Q: How to install the Engine Mount Bracket?
A:
First, you should install the engine mount bracket, the right engine splash shield, and the right front wheel and tire. Next, you should connect the catalytic converter pipe to the engine right-side exhaust manifold. Finally, the engine mount struts and the throttle body air inlet duct should also be installed.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the engine mount lower nuts?
A:
The recommended torque is 43 Nm (32 ft. lbs.).
By BobGM Specialist
01/11/2022 Q: How to install the Engine Mount Strut Bracket (Right Side)?
A:
You should install the lower engine mount strut bracket, the air conditioning compressor, the engine wiring harness bracket bolt, the engine oil cooler coolant line bracket bolt, and the right engine mount strut.
By BobGM Specialist
01/11/2022 Q: How to avoid oil pan damage and possible engine failure?
A:
You should insert a block of wood that spans the width of the oil pan bottom between the oil pan and the jack support.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the engine mount strut bolt?
A:
The recommended torque is 48 N.m (35 ft. lbs.).
By BobGM Specialist
01/11/2022 Q: How to remove the Engine Mount Strut (Right)?
A:
You should remove the bolt and the nut from the engine mount strut and the engine mount strut. In addition, you should inspect the rubber in the engine mount strut for hardness, splitting, and cracking.
By BobGM Specialist
01/11/2022 Q: How to remove the Engine Mount Strut Bracket (Right Side)?
A:
You should remove the right engine mount strut, the engine oil cooler coolant line bracket bolt, the engine wiring harness bracket bolt, the air conditioning compressor mounting bolts, the air conditioning compressor, the vertical engine mount strut bracket bolt, the lower engine mount strut bracket bolt, and the right engine mount strut bracket.
By BobGM Specialist
01/11/2022 See more FAQs (12)