< Back ×
My Vehicle Change Vehicle
2000 Chevrolet Venture
< Back to View All
Door Handles, Locks & Related Parts
- Department
- Prices
OEM (Genuine) 2000 Chevrolet Venture Lower Hinge
PartNumber: 10304605
Product Specifications- Location: Driver Side
- Other Names: Hinge, Lower Hinge
- Item Dimensions: 4.3 x 4.0 x 3.1 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Venture Lower Hinge
Vehicle Fitment- 2000 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
$11.52 MSRP:$17.37You Save: $5.85 (34%)
OEM (Genuine) 2000 Chevrolet Venture Upper Hinge
PartNumber: 15782669
Product Specifications- Location: Driver Side
- Other Names: Hinge, Upper Hinge
- Item Dimensions: 5.5 x 5.1 x 4.5 inches
- Item Weight: 2.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10304601
- Part Description: 2000 Chevrolet Venture Upper Hinge
Vehicle Fitment- 2000 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
OEM (Genuine) 2000 Chevrolet Venture Lower Hinge
PartNumber: 10304604Product Specifications- Location: Passenger Side
- Other Names: Hinge, Lower Hinge
- Item Dimensions: 5.1 x 4.3 x 3.5 inches
- Item Weight: 3.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Venture Lower Hinge
Vehicle Fitment- 2000 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
OEM (Genuine) 2000 Chevrolet Venture Hinge Asm-Front Side Door Upper
PartNumber: 15782668Product Specifications- Location: Passenger Side
- Other Names: Hinge, Upper Hinge
- Item Dimensions: 4.3 x 4.1 x 3.2 inches
- Item Weight: 2.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10304600
- Part Description: 2000 Chevrolet Venture Hinge Asm-Front Side Door Upper
Vehicle Fitment- 2000 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
OEM (Genuine) 2000 Chevrolet Venture Hinge Asm-Lift Gate
PartNumber: 10395371
Product Specifications- Location: Driver Side; Passenger Side
- Item Dimensions: 8.5 x 5.1 x 4.7 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10400564
- Part Description: 2000 Chevrolet Venture Hinge Asm-Lift Gate
Vehicle Fitment- 2000 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
FAQ for Door Hinge Repair
Q: How to install the rear sliding door lock striker?
A:
You should install the sliding door striker and the sliding door striker screws.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the sliding door striker screws?
A:
The recommended torque is 25 N.m (18 lb-ft).
By Bob
GM Specialist
02/11/2022Q: How to remove the rear sliding door lock striker?
A:
You should remove the sliding door striker screws and the sliding door striker.
By Bob
GM Specialist
02/11/2022Q: What should be noted when installing the rear sliding door lock striker?
A:
You should note that the striker is mounted through an oversized hole into a caged nut. This arrangement allows approximately 4 mm (0.15 in) of adjustment.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the cone adjuster bolt?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the upper or lower door-side hinge bolts?
A:
The recommended torque is 33 N.m (24 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to install the Hinge-Front Door?
A:
First, you should install the cone adjuster bolt, the new hinge, the door side hinge bolts, and the body side hinge bolts. Next, you should remove the supports and the reference tape. Finally, you should adjust the front door.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the front door lock striker screws?
A:
The recommended torque is 25 N.m (18 LB-FT).
By Bob
GM Specialist
29/10/2022Q: How to remove the Front Side Door Lock Striker?
A:
You should open the front door and scribe the location of the existing front door lock striker on the B-pillar. Next, you should remove the front door lock striker.
By Bob
GM Specialist
29/10/2022Q: How to install the Front Side Door Lock Striker?
A:
You should install the front door lock striker and close the front door.
By Bob
GM Specialist
29/10/2022See more FAQs (5)