< Back ×
My Vehicle Change Vehicle
2000 Chevrolet Venture
< Back to View All
Cooling Systems, Fans & Radiators
- Department
- Prices
OEM (Genuine) 2000 Chevrolet Venture Hose Assembly Assembly-Radiator Outlet
PartNumber: 10433814
Product Specifications- Notes: All Models
- Other Names: Lower Hose
- Item Dimensions: 8.9 x 3.4 x 14.4 inches
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10238967
- Part Description: 2000 Chevrolet Venture Hose Assembly Assembly-Radiator Outlet
Vehicle Fitment- 2000 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
$20.58 MSRP:$39.45You Save: $18.87 (48%)
OEM (Genuine) 2000 Chevrolet Venture Hose
PartNumber: 10436474
Product Specifications- Notes: Trans Cooler, Inlet
- Other Names: Hose
- Item Dimensions: 36.0 x 9.8 x 2.6 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Venture Hose
Vehicle Fitment- 2000 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
$20.12 MSRP:$32.11You Save: $11.99 (38%)
OEM (Genuine) 2000 Chevrolet Venture Upper Radiator Hose Assembly
PartNumber: 10433812
Product Specifications- Notes: All Models
- Other Names: Upper Hose
- Item Dimensions: 16.8 x 6.2 x 3.8 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10238922
- Part Description: 2000 Chevrolet Venture Upper Radiator Hose Assembly
Vehicle Fitment- 2000 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
OEM (Genuine) 2000 Chevrolet Venture Transmission Fluid Cooler Outlet Hose Assembly
PartNumber: 10436475
Product Specifications- Notes: Trans Cooler, Outlet
- Other Names: Hose
- Item Dimensions: 41.3 x 12.4 x 2.7 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Venture Transmission Fluid Cooler Outlet Hose Assembly
Vehicle Fitment- 2000 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
FAQ for Coolant Hose Repair
Q: How to install the Thermostat Bypass Pipes?
A:
You should install the thermostat bypass pipe, the thermostat bypass pipe hose, the thermostat bypass pipe hose clamp, the thermostat bypass pipe bolt, and the spark plug wire harness. In addition, you should fill the cooling system.
By Bob
GM Specialist
01/11/2022Q: How to remove the Body Heater Hose - Outlet?
A:
You should remove the air cleaner and duct assembly, the hose clamp, and the throttle body heater inlet hose. In addition, you should drain the coolant until the coolant level is below the throttle body heater hoses.
By Bob
GM Specialist
01/11/2022Q: How to remove the Body Heater Inlet Hose?
A:
You should remove the air cleaner and duct assembly, the throttle cable bracket, the hose clamp, and the throttle body heater inlet hose. In addition, you should drain the coolant until the coolant level is below the throttle body heater hoses.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the thermostat bypass pipe bolt?
A:
The recommended torque is 11 N.m (98-inch lbs.).
By Bob
GM Specialist
01/11/2022Q: How to install the Body Heater Hose - Outlet?
A:
You should install the throttle body heater inlet hose, the hose clamps as well as the air cleaner and duct assembly. In addition, you should fill the cooling system.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the thermostat bypass pipe nut?
A:
The recommended torque is 25 N.m (118 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: How to install the Body Heater Inlet Hose?
A:
You should install the throttle body heater inlet hose, the hose clamps, the throttle cable bracket as well as the air cleaner and duct assembly. In addition, you should fill the cooling system.
By Bob
GM Specialist
01/11/2022See more FAQs (2)