Notes: All Models; 3.4l;EGR Valve, Vapor Canister And Sensors
Item Dimensions: 4.6 x 2.8 x 2.9 inches
Item Weight: 0.70 Pounds
Fitment Type: Direct Replacement
Part Description: 2000 Chevrolet Venture Valve Asm-Evap Emission Canister Purge Solenoid
More Info
Vehicle Fitment
2000 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
FAQ for Canister Purge Valves Repair
Q: How to install the Canister Vent Valve?
A:
First, you should install the EVAP vent valve. Next, you should connect the vent hose and the EVAP vent valve electrical connector.
By Bob
GM Specialist
02/11/2022
Q: How to remove the Canister Vent Valve?
A:
First, you should disconnect the EVAP vent valve electrical connector and remove the EVAP vent valve. Next, you should disconnect the vent hose and remove the valve.
By Bob
GM Specialist
02/11/2022
Q: How to install the Canister Purge Control Valve?
A:
You should install the bolt and secure the EVAP canister purge valve. In addition, you should connect the purge valve electrical connector and the hoses.
By Bob
GM Specialist
29/10/2022
Q: How to remove the Canister Purge Control Valve?
A:
First, you should turn off the ignition and note the position of the EVAP hoses for installation. Next, you should disconnect the EVAP canister purge valve electrical connector and hoses. Finally, you should remove the EVAP purge valve.
By Bob
GM Specialist
29/10/2022
FAQ for Other Repair Info
Q: How to install the EGR Valve?
A:
First, you should install the EGR Valve with a new gasket. Next, you should connect the pipe assembly, the EGR valve electrical connector, and the negative battery cable.
Q: What is the recommended torque for the locknut?
A:
The recommended torque is 10 N.m (89 lb in).
Q: How to install the Air Injection Pump Relay?
A:
You should install the air pump relay into the vehicle and reconnect the wiring connector to the air pump relay.