Part Description: 2000 Chevrolet Venture Side Terminal Quick Connect Battery Harness Repair Splice
More Info
Vehicle Fitment
2000 Chevrolet Venture | All Trims | 6 Cyl 3.4L
FAQ for Battery Cables Repair
Q: How to install the Negative?
A:
You should install the battery ground (negative) cable and set the clock to the current time.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the battery terminal bolt?
A:
The recommended torque is 16 N.m (12 lb-ft).
By Bob
GM Specialist
01/11/2022
Q: How to remove the Negative?
A:
First, you should record all of the vehicle preset radio stations. Next, you should turn off all the lamps and accessories. In addition, you should turn the ignition off. Finally, the battery ground (negative) cable should be removed.
By Bob
GM Specialist
01/11/2022
Q: What should be noted when servicing the Negative?
A:
You should be careful not to connect the negative booster cable to the housings of other vehicle electrical accessories or equipment. In addition, you should not use the boost, jump start, crank, or an equivalent setting that may be available on the battery charger for prolonged charging of the battery.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to remove the starter motor?
A:
You should disconnect the battery ground (negative) cable and remove the following parts: the Starter motor BAT terminal nut, the electrical leads, the starter motor S terminal nut, the torque converter cover, and the starter motor.
Q: What is the recommended torque for the generator B+ terminal nut?