2000 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
$16.26MSRP: $29.42
You Save: $13.16 (45%)
FAQ for A/C Service Adapter Repair
Q: How to remove the service ports?
A:
First, you should remove the cap and recover the refrigerant. Next, the service valve should be removed.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the service valve?
A:
The recommended torque is 11 N.m (89 LB IN).
By Bob
GM Specialist
01/11/2022
Q: How to install the service ports?
A:
First, you should install the service valve. Next, you should evacuate and charge the system. Finally, you should inspect the A/C system for leaks and install the cap.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to service the Ambient Temperature Sensor/Switch HVAC?
A:
You should turn the ignition off, open the hood, disconnect the electrical connector, and remove the outside ambient Air Temperature Sensor.
Q: How to install the Blower Motor Resistor - Auxiliary?
A:
You should install the Blower Motor Resistor, the blower motor resistor attaching screws, and the left rear quarter trim panel. In addition, you should connect the electrical connector.
Q: How to remove the Heater Core-Auxiliary?
A:
You should drain the cooling system, disconnect the heater hose quick-disconnects, and remove the following parts: the left side rear quarter lower trim panel, the heater pipe bracket, the heater pipe block fitting bolt, and the Heater Core retaining screws.