< Back ×
My Vehicle Change Vehicle
2000 Chevrolet Tracker
< Back to View All
Clutches, Linkages & Flywheels
- Department
- Brands
- Prices
National® Clutch Pilot Bearing for 2000 Chevrolet Tracker
PartNumber: 102-CCProduct Specifications- Bore: 0.591"
- Design: Single Row Radial
- Inner Race Bore: 0.591"
- Inner Race Radius: 0.020"
- Inner Race Width: 0.354"
- Outer Race Outside Diameter: 1.260"
- Outer Race Radius: 0.020"
- Outer Race Width: 0.354"
- Outside Diameter: 1.260"
- Width: 0.354"
- Part Description: 2000 Chevrolet Tracker Clutch Pilot Bearing
Vehicle Fitment- 2000 Chevrolet Tracker | All Trims | 4 Cyl 2.0L
$13.53
FAG® Clutch Pilot Bearing for 2000 Chevrolet Tracker
PartNumber: 6002.2RSRProduct Specifications- Notes: FAG Global# 6002.2RSR;FAG Global# 6002.2RSR
- Bearing Inside Diameter: 0.591; 15.011
- Bearing Outside Diameter: 1.26; 32.004
- Length: 0.354; 8.992
- UPC: 670774295911
- Part Description: 2000 Chevrolet Tracker Clutch Pilot Bearing
Vehicle Fitment- 2000 Chevrolet Tracker | All Trims | 4 Cyl 2.0L
OEM (Genuine) 2000 Chevrolet Tracker Bearing, Clutch Pilot
PartNumber: 96057941
Product Specifications- Notes: Tracker; 1.6l
- Other Names: Pilot Bearing
- Item Dimensions: 2.2 x 2.1 x 0.7 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Tracker Bearing, Clutch Pilot
Vehicle Fitment- 2000 Chevrolet Tracker | Base, LSi | 4 Cyl 1.6 L GAS
OEM (Genuine) 2000 Chevrolet Tracker Bearing, Input Shaft (On Esn)
PartNumber: 91177587Product Specifications- Notes: Tracker; 2.0l
- Other Names: Pilot Bearing
- Item Dimensions: 1.3 x 1.4 x 0.4 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 91174412
- Part Description: 2000 Chevrolet Tracker Bearing, Input Shaft (On Esn)
Vehicle Fitment- 2000 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 2.0 L GAS
FAQ for Pilot Bearings Repair
Q: What is the removal procedure for the pilot bearing?
A:
The procedure is to remove the manual transmission assembly from the vehicle, remove the pressure plate and the clutch disc from the flywheel, remove the clutch pilot bearing from the crankshaft using the J 37764, J 34839, and the J 23907, and then inspect the clutch pilot bearing for scoring, binding or rough operation.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the pilot bearing?
A:
The proper way is to install the clutch bearing into the crankshaft using the J 34848 with the J 7079-2, install the clutch disc and the pressure plate to the flywheel, and then install the manual transmission assembly into the vehicle.
By Bob
GM Specialist
01/11/2022