< Back ×
My Vehicle Change Vehicle
2000 Chevrolet Tracker
< Back to View All
Fuses & Fuse Box
- Department
- Prices
OEM (Genuine) 2000 Chevrolet Tracker Box Asm, Junction (On Esn)
PartNumber: 30020837
Product Specifications- Other Names: Fuse Box
- Item Dimensions: 8.7 x 8.6 x 6.7 inches
- Item Weight: 1.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Tracker Box Asm, Junction (On Esn)
Vehicle Fitment- 2000 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
OEM (Genuine) 2000 Chevrolet Tracker Block, Engine Wiring Harness Junction
PartNumber: 91174703
Product Specifications- Other Names: Junction Block
- Item Dimensions: 11.8 x 9.8 x 5.4 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Tracker Block, Engine Wiring Harness Junction
Vehicle Fitment- 2000 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
FAQ for Fuse Box Repair
Q: What is the proper way to install the underhood fuse block?
A:
The proper way is to install the harness to the vehicle, install the harness to the retainers, and then install the relays to the fuse block bracket.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the underhood fuse block?
A:
The procedure is to remove the relays from the fuse block bracket, remove the harness from the retainers, and then remove the harness from the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the relay/fuse center?
A:
The proper way is to install any fuses and relays that were removed from the front of the junction block, install the junction block to the 3 retaining studs, install the bracket that contains the fuel pump relay and the main relay to the left front side of the junction block, and then install the IP steering column opening trim plate.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the relay/fuse center?
A:
The procedure is to remove the IP steering column opening trim plate, remove the 2 nuts that retain the junction block to the left hinge pillar, remove the nut that retains the junction block to the bulkhead, remove the junction block from the 3 retaining studs to gain the necessary clearance to disconnect the electrical connectors from the rear of the junction block, and then remove the junction block from the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the underhood fuse block (Fuse Block)?
A:
The procedure is to remove the fuse block cover, remove the bolt from the fuse block bracket, and then remove the 2 bolts and the battery-positive wires from the fuse block.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the underhood fuse block (Fuse Block)?
A:
The proper way is to connect the electrical connectors to the bottom of the fuse block, install the fuse block to the bracket, and then install the fuse block cover.
By Bob
GM Specialist
01/11/2022See more FAQs (1)