2000 Chevrolet Tracker Clutch Forks

The proper way is to install the CPP switch into the brake pedal bracket, install the CPP switch electrical connector to the CPP switch, and then install the negative battery cable.

The proper way is to install the J 35271 to the engine block to hold the flywheel stationary, install the clutch disc to the flywheel using the universal clutch alignment arbor to center the disc on the flywheel and support the disc in place, install the pressure plate to the flywheel, and then install the manual transmission assembly into the vehicle.

The procedure is to disconnect the negative battery cable, remove the CPP switch electrical connector from the CPP switch, loosen the CPP switch lock nut, and then remove the CPP switch from the brake pedal bracket by turning counterclockwise.

The procedure is to remove the manual transmission assembly from the vehicle, remove the 6 pressure plate cover bolts and the pressure plate assembly from the flywheel, remove the clutch disc and the universal clutch alignment arbor from the flywheel, remove the J 35271 from the engine block, and then inspect the pilot bearing for smooth rotation.