< Back ×
My Vehicle Change Vehicle
2000 Chevrolet Tracker
< Back to View All
Brake Boosters & Brake Master Cylinders
- Department
- Series
- Brands
- Prices
OEM (Genuine) 2000 Chevrolet Tracker Booster Assembly
PartNumber: 91174788
Product Specifications- Notes: W/ABS;W/O ABS, 2.0, 2.5 Liter
- Other Names: Booster Assembly, Brake Booster
- Item Dimensions: 14.1 x 13.5 x 11.3 inches
- Item Weight: 9.90 Pounds
- Part Description: 2000 Chevrolet Tracker Booster Assembly
Vehicle Fitment- 2000 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
$236.14 MSRP:$429.36You Save: $193.22 (46%)
Cardone Reman® Remanufactured Vacuum Power Brake Booster w/o Master Cylinder for 2000 Chevrolet Tracker
PartNumber: 53-2513Product Specifications- Notes: with Dual Diaphragm Booster;without Master Cylinder
- Booster Type: Vacuum
- Casting Material: Steel
- Color: Powder Coated Gray
- Diaphragm Diameter: 8.740"
- Diaphragm Type: Dual
- E-Waste: No
- Master Cylinder: Without
- Master Cylinder Stud Thread Size: M8 x 1.25
- Material: Steel
- Part Description: 2000 Chevrolet Tracker Remanufactured Vacuum Power Brake Booster w/o Master Cylinder
Vehicle Fitment- 2000 Chevrolet Tracker | All Trims | All Engines
$122.64
Centric® Power Brake Booster for 2000 Chevrolet Tracker
PartNumber: 160.88828Product Specifications- UPC: 805890309208
- Part Description: 2000 Chevrolet Tracker Power Brake Booster
Vehicle Fitment- 2000 Chevrolet Tracker | All Trims | 4 Cyl 1.6L
OEM (Genuine) 2000 Chevrolet Tracker Hydraulic Power Brake Booster Assembly
PartNumber: 91174789Product Specifications- Notes: W/O ABS, 1.6 Liter
- Other Names: Booster Assembly, Brake Booster
- Item Dimensions: 12.7 x 12.7 x 11.1 inches
- Item Weight: 5.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Tracker Hydraulic Power Brake Booster Assembly
Vehicle Fitment- 2000 Chevrolet Tracker | Base, LSi | 4 Cyl 1.6 L GAS
FAQ for Brake Booster Repair
Q: How to remove the vacuum brake booster?
A:
The proper way is to remove the Brake Pressure Modulator Valve from the vehicle, remove the master cylinder assembly, remove the nuts from the booster, and then remove the booster.
By Bob
GM Specialist
01/11/2022Q: How to adjust the vacuum brake booster?
A:
The proper way is to push the piston rod several times, ensuring that the reaction disc is in place, maintain atmospheric pressure inside the booster when measuring the clearance, place the J 39567 on the master cylinder, push the J 39567 pin down until it touches the master cylinder piston, remove the J 39567 from the master cylinder, turn the J 39567 upside down and set it on the booster assembly, and then turn the adjusting screw of the piston rod to adjust the clearance.
By Bob
GM Specialist
01/11/2022Q: How to install the vacuum brake booster?
A:
The proper way is to apply Wheel Bearing Lubricant, GM P/N 1051344, or the equivalent, to the master cylinder piston, install the booster to the bulkhead, install the push rod clevis, install the master cylinder, and then install the Brake Pressure Modulator Valve.
By Bob
GM Specialist
01/11/2022