Notes: Tracker; Back-Up;Tracker; High Mount Stoplamp;Tracker; Rear Turn Signal; 2 Door
Location: Driver Side; Passenger Side
Item Dimensions: 4.3 x 2.2 x 2.2 inches
Item Weight: 0.50 Pounds
Fitment Type: Direct Replacement
Replaces: 9441956, 09441956, 12450313
Part Description: 2000 Chevrolet Tracker Stoplamp Bulb
More Info
Vehicle Fitment
2000 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
$3.51MSRP: $6.34
You Save: $2.83 (45%)
FAQ for Back Up Light Bulbs Repair
Q: What is the proper way to install the backup light bulb?
A:
The proper way is to install the backup lamp bulb to the backup lamp bulb sockets, install the backup lamp socket to the lamp assembly, twist clockwise to secure the socket, and then install the tail lamp assembly to the vehicle.
By Bob
GM Specialist
28/10/2022
Q: What is the removal procedure for the backup light bulb?
A:
The procedure is to remove the 2 screws which secure the tail lamp assembly, pull the tail lamp assembly rearward to access the backup lamp bulb socket, twist the backup lamp bulb socket counterclockwise and remove the socket from the lamp assembly, and then remove the backup lamp bulb from the backup lamp bulb socket.
By Bob
GM Specialist
28/10/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the parking light bulb?
A:
The procedure is to raise and suitably support the hood, twist the park/turn lamp bulb socket counterclockwise and remove the socket from the headlamp assembly, and then remove the bulb from the socket.
Q: What is the removal procedure for the headlamp bulb?
A:
The procedure is to raise and suitably support the hood, disconnect the headlamp bulb electrical connector, remove the rubber insulator from the headlamp assembly, push the headlamp bulb retainer downward and to the side to release the headlamp bulb, and then remove the headlamp bulb from the headlamp assembly.
Q: How to install the tail light bulb?
A:
The proper way is to install the tail/stop lamp bulb to the tail/stop lamp bulb socket, install the tail/stop lamp bulb socket to the lamp assembly and twist clockwise to secure the socket, and then install the tail lamp assembly to the vehicle.