< Back ×
My Vehicle Change Vehicle
2000 Chevrolet Monte Carlo
< Back to View All
Air Filters & Intake Systems
- Department
- Prices
OEM (Genuine) 2000 Chevrolet Monte Carlo Throttle Body Assembly
PartNumber: 24507227
Product Specifications- Notes: 3.8 Liter
- Other Names: Throttle Body
- Item Dimensions: 8.2 x 7.4 x 7.3 inches
- Item Weight: 3.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 24507237
- Part Description: 2000 Chevrolet Monte Carlo Throttle Body Assembly
Vehicle Fitment- 2000 Chevrolet Monte Carlo | LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.8 L GAS
OEM (Genuine) 2000 Chevrolet Monte Carlo Throttle Body Assembly
PartNumber: 12595271
Product Specifications- Notes: Impala, Monte Carlo; 3.4l
- Other Names: Throttle Body
- Item Dimensions: 8.3 x 6.2 x 6.2 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 17113630
- Part Description: 2000 Chevrolet Monte Carlo Throttle Body Assembly
Vehicle Fitment- 2000 Chevrolet Monte Carlo | |
FAQ for Throttle Body Repair
Q: What is the proper way to install the accelerator control cable?
A:
You can install the accelerator cable into the vehicle, slide the accelerator cable through the bulkhead, install the snap retainer, connect the accelerator cable through the slot in the accelerator pedal lever, seat the snap retainer in the accelerator pedal lever, check for complete throttle opening and closing positions, connect the accelerator cable to the throttle body lever, connect the accelerator cable to the accelerator cable bracket, install the accelerator cable, install the left instrument panel sound insulator and install the injector sight shield.
By Bob
GM Specialist
02/11/2022Q: How do you replace the accelerator controls cable?
A:
You can remove the injector sight shield and the left instrument panel sound insulator, disconnect the accelerator cable, squeeze the accelerator cable cover tangs, push the accelerator cable through the bulkhead, disconnect the accelerator cable from both retaining clips, disconnect the accelerator cable from the throttle body lever, disconnect the accelerator cable from the accelerator cable bracket and remove the accelerator cable from the vehicle.
By Bob
GM Specialist
02/11/2022Q: How do you install the accelerator controls cable bracket?
A:
You can reinstall the two bracket bolts, connect the wiring harness clip to the bracket, connect the accelerator cable to the bracket, connect the cruise control cable to the bracket, check for complete throttle opening and closing positions, and install the fuel injection sight shield.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the accelerator controls cable bracket?
A:
The procedure is to remove the fuel injector sight shield, rotate the throttle lever, disconnect the cruise control cable, disconnect the accelerator cable, disconnect the wiring harness clip and remove the two bolts.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the idle speed/throttle actuator?
A:
The procedure is to remove the injector sight shield, the electrical connector, the idle air control valve attaching screws, the idle air control valve, and the idle air control valve O-ring.
By Bob
GM Specialist
01/11/2022Q: How do you install the idle speed/throttle actuator?
A:
You can install the new idle air control O-ring, the idle air control valve, the idle air control valve attaching screws, and the electrical connector, reset the idle air control valve, start the engine, allow the engine to reach operating temperature and install the injector sight shield.
By Bob
GM Specialist
01/11/2022See more FAQs (1)