< Back ×
My Vehicle Change Vehicle
2000 Chevrolet Monte Carlo
< Back to View All
Interior & Exterior Trim
- Department
- Prices
OEM (Genuine) 2000 Chevrolet Monte Carlo Pad Asm, Driver Seat Cushion
PartNumber: 12455420
Product Specifications- Notes: 2000
- Location: Driver Side
- Other Names: Seat Cushion, Seat Cushion Pad
- Item Dimensions: 25.7 x 22.2 x 6.1 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Monte Carlo Pad Asm, Driver Seat Cushion
Vehicle Fitment- 2000 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
OEM (Genuine) 2000 Chevrolet Monte Carlo Pad Asm, Rear Seat Cushion (W/ Frame)
PartNumber: 12454161
Product Specifications- Notes: 2000-05
- Other Names: Seat Cushion Pad
- Item Weight: 9.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Monte Carlo Pad Asm, Rear Seat Cushion (W/ Frame)
Vehicle Fitment- 2000 Chevrolet Monte Carlo | LS, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
OEM (Genuine) 2000 Chevrolet Monte Carlo Pad Asm, Passenger Seat Cushion
PartNumber: 12454289
Product Specifications- Notes: 2000
- Location: Passenger Side
- Other Names: Seat Cushion, Seat Cushion Pad
- Item Weight: 2.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Monte Carlo Pad Asm, Passenger Seat Cushion
Vehicle Fitment- 2000 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
OEM (Genuine) 2000 Chevrolet Monte Carlo Pad Asm, Rear Seat Back Cushion Bolster RH
PartNumber: 12454019
Product Specifications- Notes: 2000-05, Side Bolster
- Location: Driver Side
- Other Names: Cushion, Seat Back End
- Item Dimensions: 26.0 x 6.6 x 3.7 inches
- Item Weight: 1.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Monte Carlo Pad Asm, Rear Seat Back Cushion Bolster RH
Vehicle Fitment- 2000 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
OEM (Genuine) 2000 Chevrolet Monte Carlo Pad Asm, Rear Seat Back Cushion Bolster 30%
PartNumber: 12454020
Product Specifications- Notes: 2000-05, Side Bolster
- Location: Passenger Side
- Other Names: Cushion, Seat Back End
- Item Dimensions: 25.0 x 6.9 x 5.3 inches
- Item Weight: 1.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Monte Carlo Pad Asm, Rear Seat Back Cushion Bolster 30%
Vehicle Fitment- 2000 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
FAQ for Seat Cushion Pad Repair
Q: How do you replace the rear seat cushion cover (folding)?
A:
You can remove the rear seat back, the rear seat back bolsters, the bolts, and the left and right rear seat back, unhook the J-hook retainers, pull back the right and/or left carpet, reach inside of the right and/or left rear seat back cover, remove the rear seat folding armrest and remove the right and/or left rear seat back cover.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the front seat cushion cover (bucket seat)?
A:
The procedure is to remove the front seat, the front seat back, and the front seat outer trim bracket, disconnect the electrical connector, unfasten the J-hook retainers, remove the hog rings, unfasten the hook and the loop retainers, remove the front seat cushion cover and remove the J-hook retainers from the front seat frame.
By Bob
GM Specialist
02/11/2022Q: How do you install the front seat cushion cover (bucket seat)?
A:
You can install the J-hook retainers, align the front seat cushion cover to the front seat cushion, install the seat cushion cover and the hog rings, fasten the J-hook retainers, fasten the hook and the loop retainers, connect the electrical connector and install the front seat outer trim bracket, the front seat back and the front seat.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque when you install the split-folding seat back frame bolts?
A:
You can tighten the split-folding seat back frame bolts to 10 Nm (89 lb in).
By Bob
GM Specialist
02/11/2022Q: What is the proper way to install the rear seat back cushion cover (nonfolding)?
A:
You can position the rear seat back cover to the pad, align the alignment marks on the rear seat back cover to the alignment marks on the pad, pull the rear seat back cover over the pad, pull over and under the edge, fasten the hook and the loop retainers, align the alignment marks on the rear seat back cover to the alignment marks on the pad, install the hog rings, install the rear seat armrest and install the rear seat back.
By Bob
GM Specialist
02/11/2022Q: What is the proper way to install the driver or passenger seat back cushion cover?
A:
You can position the front seat back cover to the pad, pull the seat back cover over the pad, fasten the hook and the loop retainers, install the front seat head restraint retainers, the front seat back release knob bezel, the seat back cover, the seat back heater electrical line, the front seat back cover end flaps and the rear screw, fasten the J-hook retainer at the bottom of the seat back cover, install the front seat head restraint, connect the electrical connector and enable the SIR system.
By Bob
GM Specialist
02/11/2022Q: How do you replace the rear seat cushion cover (non-folding)?
A:
You can remove the rear seat back, the rear seat armrest, and the hog rings, reach inside of the rear seat back cover and remove the rear seat back cover.
By Bob
GM Specialist
02/11/2022Q: How do you remove the bezel from the seat back release lever?
A:
You can slide a flat-bladed tool under each side of the bezel, rotate the tools out away from the seat back, press in to free the bezel, and remove the bezel from the seat back.
By Bob
GM Specialist
02/11/2022Q: How do you replace the front seat cushion cover (split bench)?
A:
You can remove the front seat, the front seat armrest, the front seat back, and the front seat outer trim bracket, then disconnect the electrical connector, unfasten the J-hook retainers, the retainers from the seat frame on the bottom of the front seat cushion and the retainer from the front seat frame at the seat belt, remove the hog rings, unfasten the hook and the loop retainers, remove the front seat cushion cover and remove the J-hook retainers from the front seat frame.
By Bob
GM Specialist
02/11/2022Q: What is the proper way to install the front seat cushion cover (split bench)?
A:
You can install the J-hook retainers to the front seat frame, align the front seat cushion cover to the front seat cushion, install the front seat cushion cover and the hog rings, fasten the J-hook retainers, fasten the retainers to the front seat frame on the bottom of the front seat cushion and at the seat belt, fasten the hook and the loop retainers, connect the electrical connector and install the front seat outer trim bracket, the front seat armrest, the front seat back and the front seat.
By Bob
GM Specialist
02/11/2022See more FAQs (37)