< Back ×
My Vehicle Change Vehicle
2000 Chevrolet Monte Carlo
< Back to View All
Brake Dust Shields, Backing Plates & Brake Hardware
- Department
- Brands
- Prices
OEM (Genuine) 2000 Chevrolet Monte Carlo Rear Cable
PartNumber: 15242626
Product Specifications- Notes: Impala, Monte Carlo; Left
- Other Names: Park Brake Cable, Rear Cable
- Item Dimensions: 11.6 x 11.2 x 3.7 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10310911, 10405321
- Part Description: 2000 Chevrolet Monte Carlo Rear Cable
Vehicle Fitment- 2000 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
$30.52 MSRP:$57.58You Save: $27.06 (47%)
Wagner® Parking Brake Cable for 2000 Chevrolet Monte Carlo
PartNumber: BC141967Product Specifications- UPC: 008536571407
- Part Description: 2000 Chevrolet Monte Carlo Parking Brake Cable
Vehicle Fitment- 2000 Chevrolet Monte Carlo | All Trims | All Engines
OEM (Genuine) 2000 Chevrolet Monte Carlo Cable Asm-Parking Brake Front
PartNumber: 15297497Product Specifications- Notes: Impala, Monte Carlo
- Other Names: Front Cable
- Item Dimensions: 11.4 x 10.8 x 3.8 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25919312, 10310909
- Part Description: 2000 Chevrolet Monte Carlo Cable Asm-Parking Brake Front
Vehicle Fitment- 2000 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2000 Chevrolet Monte Carlo Cable Asm-Parking Brake Rear
PartNumber: 15297496
Product Specifications- Notes: Impala, Monte Carlo; Right
- Other Names: Park Brake Cable, Rear Cable
- Item Dimensions: 30.6 x 9.6 x 1.3 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10310910
- Part Description: 2000 Chevrolet Monte Carlo Cable Asm-Parking Brake Rear
Vehicle Fitment- 2000 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
FAQ for Parking Brake Cable Repair
Q: How do you adjust the parking lock cable?
A:
You can place the shift lever in the PARK position, place the ignition key in the LOCK position, ensure the shift lever cannot move to another position, place the ignition key in the RUN position, place the shift lever in the NEUTRAL position, ensure that the ignition key cannot turn to the LOCK position, pull the cable connector lock back to the UP position, readjust the cable connector, recheck the operation, pull the connector lock button to the UP position, move the cable connector nose rearward, push the lock button down and reinstall the cable into the clips.
By Bob
GM Specialist
02/11/2022Q: What is the proper way to install the park brake cable guide?
A:
You can install the cable guide, install the cable guide mounting bolt and lower the vehicle.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the front park brake cable?
A:
The procedure is to remove the left side instrument panel insulator, the left side carpet retainers, and the lower center pillar trim panel, fold back the carpeting, remove the parking brake cable from the park brake cable guides, raise the vehicle, remove the parking brake cable at the equalizer, lower the vehicle, remove the cable button end and remove the front cable.
By Bob
GM Specialist
02/11/2022Q: How do you replace the parking lock cable?
A:
You can disconnect the battery negative cable, remove the console, place the transaxle shift control lever in the PARK position, turn the ignition key to the RUN position, slip a screwdriver blade into the slot, depress the cable latch, pull the cable from the inhibitor, remove the park/lock cable at the shift control, remove the cable retainer and remove the park/lock cable.
By Bob
GM Specialist
02/11/2022Q: How do you replace the left/right rear park brake cable?
A:
You can raise the vehicle, loosen the brake cable at the equalizer, remove the parking brake equalizer, remove the cable from the mounting bracket and the actuator lever and remove the parking brake cable from the vehicle.
By Bob
GM Specialist
02/11/2022Q: How do you replace the park brake cable guide?
A:
You can raise the vehicle, remove the cable guide mounting bolt and remove the cable guide.
By Bob
GM Specialist
02/11/2022Q: How do you install the front park brake cable?
A:
You can install the front cable, connect the cable to the parking brake, install the cable button and the cable button assurance clip, raise the vehicle, tighten the nut on the equalizer, lower the vehicle, install the parking brake cable through the park brake cable guides, position the carpeting properly, install the lower center pillar trim panel, the left side carpet retainers and the left side instrument panel insulator and adjust the parking brake.
By Bob
GM Specialist
02/11/2022Q: What is the proper way to install the parking lock cable?
A:
You can ensure the cable lock button is in the UP position and that the shift lever is in the PARK position, install the park/lock cable, snap the cable connector into the shifter base, install the cable retainer, ensure the ignition key is in the RUN position, install the cable into the inhibitor housing, turn the ignition key to the LOCK position, install the cable end, push the cable connector nose forward, push the cable connector lock button down, inspect the operation of the park/lock cable for proper adjustment, install the console and connect the battery negative cable.
By Bob
GM Specialist
02/11/2022Q: What is the proper way to install the left/right rear park brake cable?
A:
You can place the cable in position, install the cable on the actuator lever and the mounting bracket, install the retaining pin, tighten the nut on the equalizer, lower the vehicle and adjust the parking brake.
By Bob
GM Specialist
02/11/2022Q: How do you adjust the park brake cable?
A:
You can adjust the rear brake shoe and line, apply and fully release the parking brake six times, verify that the parking brake pedal releases completely, raise the vehicle, adjust the parking brake, lower the vehicle, apply the parking brake to four clicks, release the parking brake and lower the vehicle.
By Bob
GM Specialist
02/11/2022See more FAQs (5)