2000 Chevrolet Monte Carlo Fuel Line

You can relieve the fuel system fuel pressure, clean all engine fuel pipe connections, clean areas surrounding the engine fuel pipe connections, remove the fuel feed and fuel return pipe quick-connect fitting, raise the vehicle, disconnect the fuel return pipe quick-connect fitting and the fuel feed pipe threaded fitting, cap the in-pipe fuel filter pipe, the fuel feed pipe, and the fuel return pipe, remove the fuel feed, fuel return, EVAP pipe attaching hardware, note the position of the fuel and EVAP pipes and the fuel and EVAP pipe attaching hardware, inspect the pipes for bends, kinks and cracks and repair or replace the pipe or pipes.

You can install the new fuel feed, fuel return, and EVAP pipes and the fuel and EVAP pipe attaching hardware, remove the caps, connect the fuel return pipe quick-connect fitting, connect the fuel feed pipe threaded fitting, inspect and make sure all of the fuel pipe bundle clips, and fasteners are properly installed, lower the vehicle, connect the fuel feed, and fuel return pipe quick-connect fittings, tighten the fuel fill cap, connect the negative battery cable, inspect for leaks and install the fuel injection sight shield.

The procedure is to relieve the fuel system fuel pressure, drain the fuel tank, raise the vehicle, remove the fuel tank, disconnect the fuel feed, fuel return, and EVAP pipe quick-connect fittings, cap the fuel sender fuel pipes and the in-pipe fuel filter pipes, remove the fuel feed, fuel return, and EVAP pipe attaching hardware, remove the fuel feed, fuel return, and EVAP pipes and note the position of the fuel, EVAP pipes and the fuel and EVAP pipe attaching hardware.

You can install the new fuel feed, fuel return, EVAP pipes, and the fuel and EVAP pipe attaching hardware, remove the caps, connect the fuel feed, fuel return, and EVAP pipe quick-connect fittings, inspect and make sure all of the fuel pipe bundle clips, and fasteners are properly installed, install the fuel tank, lower the vehicle, add fuel and install the fuel tank filler pipe cap, connect the negative battery cable, inspect for leaks and reinstall the fuel injection sight shield.