< Back ×
My Vehicle Change Vehicle
2000 Chevrolet Monte Carlo
< Back to View All
Door Handles, Locks & Related Parts
- Department
- Prices
OEM (Genuine) 2000 Chevrolet Monte Carlo Upper Hinge
PartNumber: 10304599
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Lower Hinge, Upper Hinge
- Item Dimensions: 9.5 x 6.2 x 6.2 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10425263, 12533547
- Part Description: 2000 Chevrolet Monte Carlo Upper Hinge
Vehicle Fitment- 2000 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
$11.83 MSRP:$17.84You Save: $6.01 (34%)
OEM (Genuine) 2000 Chevrolet Monte Carlo Upper Hinge
PartNumber: 10304598
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Lower Hinge, Upper Hinge
- Item Dimensions: 9.5 x 8.2 x 6.1 inches
- Item Weight: 3.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12533546, 10425262
- Part Description: 2000 Chevrolet Monte Carlo Upper Hinge
Vehicle Fitment- 2000 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2000 Chevrolet Monte Carlo Hinge Asm-Rear Compartment Lid
PartNumber: 10382577
Product Specifications- Location: Driver Side
- Other Names: Hinge
- Item Dimensions: 16.0 x 4.4 x 4.3 inches
- Item Weight: 1.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10426520, 10342703
- Part Description: 2000 Chevrolet Monte Carlo Hinge Asm-Rear Compartment Lid
Vehicle Fitment- 2000 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2000 Chevrolet Monte Carlo Hinge Asm-Rear Compartment Lid
PartNumber: 10382576
Product Specifications- Location: Passenger Side
- Other Names: Hinge
- Item Dimensions: 16.1 x 4.5 x 4.4 inches
- Item Weight: 1.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10426519, 10342702
- Part Description: 2000 Chevrolet Monte Carlo Hinge Asm-Rear Compartment Lid
Vehicle Fitment- 2000 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
FAQ for Door Hinge Repair
Q: How do you replace the door hinge (Monte Carlo)?
A:
You can open the front door, support the front door, remove the intermediate hinge bolts, move the door, clean the mounting surfaces of the hinges, mark the front door hinge locations on each surface and remove the bolts, the door-side hinge, the bolts from the bodyside hinge and the bodyside hinge.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the door hinge (Monte Carlo)?
A:
You can position the bodyside hinge to the alignment marks, install the bolts to the bodyside hinge, position the door-side hinge to the bodyside hinge, install the intermediate hinge bolts to the front door hinge, install the door-side hinge bolts, remove the door support and inspect the door for proper operation and alignment.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when readjusting the door striker?
A:
You can tighten the door striker screws to 25 Nm (18 lb-ft).
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque when tightening the door lock striker screws?
A:
You can tighten the door striker screws to 25 Nm (18 lb-ft).
By Bob
GM Specialist
29/10/2022Q: What is the adjustment procedure for the door lock striker (with Clay or Caulk)?
A:
The procedure is to open the door, loosen the door striker screws, adjust the door striker up or down and inboard or outboard, apply modeling clay or body caulking compound to the door lock opening, close the door, open the door, check the door striker impression in the modeling clay or body caulking compound, readjust door striker and close the door.
By Bob
GM Specialist
29/10/2022Q: How do you install the door striker anchor plate?
A:
You can install the anchor plate, the door lock shims, the striker, and the striker screws, align the door lock striker to the alignment marks, tighten the door lock striker screws, adjust the door lock striker and install the front and/or rear trim.
By Bob
GM Specialist
29/10/2022Q: What is the adjustment procedure for the door lock striker (with Mini Wedge)?
A:
The procedure is to open the door, loosen the door striker screws, install the J 39346-A, close the door, open the door, tighten the door lock striker screws, remove the J 39346-A and close the door.
By Bob
GM Specialist
29/10/2022Q: What is the removal procedure for the door striker anchor plate?
A:
The procedure is to remove the front or rear door lock pillar trim, mark the position of the striker with a grease pencil and remove the screws, the striker, the shims, and the anchor plate.
By Bob
GM Specialist
29/10/2022See more FAQs (3)