< Back ×
My Vehicle Change Vehicle
2000 Chevrolet Monte Carlo
< Back to View All
A/C & Heating
- Department
- Prices
OEM (Genuine) 2000 Chevrolet Monte Carlo Hose & Tube Assembly
PartNumber: 19169348
Product Specifications- Notes: 2000-03, 3.8 Liter; Impala, Monte Carlo; 3.8l
- Item Dimensions: 31.9 x 4.7 x 4.6 inches
- Item Weight: 1.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10422442, 10348122
- Part Description: 2000 Chevrolet Monte Carlo Hose & Tube Assembly
Vehicle Fitment- 2000 Chevrolet Monte Carlo | SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.8 L GAS
OEM (Genuine) 2000 Chevrolet Monte Carlo AC Hose
PartNumber: 10308247
Product Specifications- Notes: 2000-03, Evap/Dehydrator
- Other Names: AC Hose, AC Line, Accumulator Tube, Hose
- Item Dimensions: 22.5 x 11.8 x 18.4 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Monte Carlo AC Hose
Vehicle Fitment- 2000 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
OEM (Genuine) 2000 Chevrolet Monte Carlo Tube Asm-A/C Evaporator
PartNumber: 10339261
Product Specifications- Notes: 2000-03, Cond To Evaporator
- Other Names: AC Line, AC Tube, Evaporator Tube
- Item Dimensions: 35.7 x 17.2 x 15.3 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10295391, 10445946, 10433079
- Part Description: 2000 Chevrolet Monte Carlo Tube Asm-A/C Evaporator
Vehicle Fitment- 2000 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
OEM (Genuine) 2000 Chevrolet Monte Carlo Hose & Tube Assembly
PartNumber: 10422443
Product Specifications- Notes: 2000-03, 3.4 Liter; Impala, Monte Carlo; 3.4l
- Item Dimensions: 25.2 x 20.7 x 7.6 inches
- Item Weight: 2.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Monte Carlo Hose & Tube Assembly
Vehicle Fitment- 2000 Chevrolet Monte Carlo | LS, LS Competition, LS Sport | 6 Cyl 3.4 L GAS
FAQ for A/C Hose Repair
Q: What is the removal procedure for the condenser tube?
A:
The procedure is to remove the air cleaner and duct assembly and the cross vehicle brace, recover the refrigerant, remove the vacuum brake booster and the liquid line, raise the vehicle, remove the lower air deflector, disconnect the electrical connector, remove the liquid line nut at the condenser, lower the vehicle, remove the liquid line nut at the orifice, disconnect the transmission shift cable retainer, remove the liquid line and remove and discard the O-rings.
By Bob
GM Specialist
28/10/2022Q: What is the proper way to install the suction hose?
A:
You can install the new O-ring seals, install the suction line into place, install the suction line into the block fitting, install the suction line block fitting bolt, install the suction line to the accumulator, install the liquid/suction line bracket and the brake modulator bracket, evacuate and recharge the system, inspect the A/C system for leaks, install the cross vehicle brace and install the air cleaner and duct assembly.
By Bob
GM Specialist
28/10/2022Q: How do you replace the evaporator tube?
A:
You can remove the air cleaner and duct assembly and the cross vehicle brace, recover the refrigerant, remove the liquid/suction line bracket, the vacuum brake booster, the liquid line nut at the orifice, the liquid line at the block fitting, and the liquid line and remove and discard the O-rings.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque when installing the compressor hose nut onto the accumulator?
A:
You can tighten the compressor hose nut to 16 Nm (12 lb-ft).
By Bob
GM Specialist
28/10/2022Q: What is the removal procedure for the compressor hose assembly?
A:
The procedure is to disconnect the negative battery cable, remove the air cleaner and duct assembly and the cross vehicle brace, recover the refrigerant, remove the compressor hose nut from the condenser and the accumulator, raise the vehicle, remove the lower air deflector, remove the nut from the compressor hose assembly, remove the compressor hose assembly from the rear of the compressor and remove the compressor hose assembly.
By Bob
GM Specialist
28/10/2022Q: How do you replace the suction hose?
A:
You can remove the air cleaner and duct assembly and the cross vehicle brace, recover the refrigerant, remove the brake modulator bracket, the liquid/suction line bracket, the suction line nut at the accumulator, the suction line block fitting bolt and the suction line and remove and discard the suction line O-rings seals.
By Bob
GM Specialist
28/10/2022Q: How do you install the condenser tube?
A:
You can install new O-ring seals, the liquid line, and the liquid line nut at the orifice, raise the vehicle, install the liquid line nut at the condenser, connect the electrical connector, install the lower air deflector, lower the vehicle, install the liquid line and the vacuum brake booster, evacuate and charge the system, inspect the system for leaks, install the cross vehicle brace and install the air cleaner and duct assembly.
By Bob
GM Specialist
28/10/2022Q: What is the proper way to install the evaporator tube?
A:
You can install the new O-ring seals and the liquid line, install the liquid line at the block fitting, install the liquid line nut at the orifice, install the liquid line/suction line bracket, install the vacuum brake booster, evacuate and charge the system, inspect the system for leaks, install the cross vehicle brace and install the air cleaner and duct assembly.
By Bob
GM Specialist
28/10/2022See more FAQs (3)