Part Description: 2000 Chevrolet Monte Carlo Drier
More Info
Vehicle Fitment
2000 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
Part Description: 2000 Chevrolet Monte Carlo A C Accumulator
More Info
Vehicle Fitment
2000 Chevrolet Monte Carlo | All Trims | All Engines
$16.48
FAQ for A/C Accumulator Repair
Q: What is the removal procedure for the accumulator?
A:
The procedure is to remove the air cleaner and duct assembly, remove the cross vehicle brace, recover the refrigerant, remove the suction hose nut at the accumulator, remove the compressor hose nut from the accumulator, remove the accumulator bracket bolt and remove the accumulator.
By Bob
GM Specialist
01/11/2022
Q: How do you install the accumulator?
A:
You can install the accumulator, the accumulator bracket bolt, the new O-ring seals, the compressor hose, and the suction hose, evacuate and charge the system, inspect the system for leaks, install the cross vehicle brace and install the air cleaner and duct assembly.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the blower motor resistor?
A:
The procedure is to disconnect the battery negative cable, remove the right side instrument panel insulator, disconnect the electrical connectors, disconnect the Blower Motor Resistor electrical connector, loosen both forward screws, remove the rearward screw and remove the blower motor resistor.
Q: What is the recommended torque when installing the heater core line clamp screw?
A:
You can tighten the Heater Core line clamp screw to 1.5 Nm (13 lb in).
Q: What is the removal procedure for the heater pipe (inlet)?
A:
The procedure is to drain the cooling system, remove the fuel injector sight shield, disconnect the heater inlet hose, position aside the Heater Hose clamp, remove the pipe adapter mounting bolt and remove the pipe adapter.