Part Description: 2000 Chevrolet K3500 Front Side Door Window Regulator Assembly
More Info
Vehicle Fitment
2000 Chevrolet K3500 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
1-30 of 32 Results
< Previous
12
Next >
FAQ for Window Regulator Repair
Q: How to remove the front door module?
A:
You shall remove the trim panel, the water deflector, the inner panel bolts, the lock rods, and the inner mounting panel.
By Bob
GM Specialist
01/11/2022
Q: How to install the front side door window regulator?
A:
The proper way is to install the regulator to the inner panel, the rivets securing the regulator to the door inner panel, the inner mounting panel assembly, the water deflector, and the trim panel.
By Bob
GM Specialist
01/11/2022
Q: How to install the rear side door window regulator?
A:
You shall install the regulator assembly, the glass weatherstrip, the window sash, the window glass, the water deflector, and the trim panel.
By Bob
GM Specialist
01/11/2022
Q: How to remove the front side door window regulator?
A:
You shall remove the trim panel, the water deflector, and the inner mounting panel assembly, drill out the front and rear rivets securing the regulator to the door inner panel and remove the regulator from the inner panel.
By Bob
GM Specialist
01/11/2022
Q: How to remove the rear side door window regulator?
A:
You shall remove the trim panel, the water deflector, the window glass, the window sash, the glass weatherstrip, and the regulator assembly from the door.
By Bob
GM Specialist
01/11/2022
Q: How to install the front door module?
A:
The proper way is to install the inner mounting panel to the window sash, the lock rods, the inner panel bolts, the speaker, the trim panel, and the water deflector.
By Bob
GM Specialist
01/11/2022
See more FAQs (1)
FAQ for Other Repair Info
Q: How to remove the power window switch?
A:
You shall remove the switch mounting panel, pry the door power Window Switch from the door trim panel, and disconnect the power accessory electrical connectors from the switch.
Q: How to install the door window regulator handle (rear door)?
A:
You shall install the bearing plate and the clip, insert the handle onto the window regulator shaft and push the handle until the clip engages the window regulator shaft.
Q: How to remove the front door module?
A:
You shall remove the trim panel, the water deflector, and the lock rods, disconnect the wiring harness, and remove the inner mounting panel.