Part Description: 2000 Chevrolet K3500 Shoe Kit, Rear Brake
More Info
Vehicle Fitment
2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
FAQ for Parking Brake Shoe Repair
Q: How to install the parking brake shoe?
A:
The proper way is to connect the shoe kits and the springs and install the support plate, the shoe kits, the index lever between the shoes, the washers, and the drum.
By Bob
GM Specialist
01/11/2022
Q: How to remove the parking brake shoe?
A:
You shall remove the drum and the washers, disconnect the support plate and the shoe kits, and remove the springs and the shoe kits.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to remove the electronic brake control module?
A:
You shall disconnect the Negative Battery Cable, remove the four T-25 Torx screws, partially remove the EBCM from the BPMV, disconnect the four electrical connectors from EBCM, and fully remove the EBCM from the BPMV.
Q: How to remove the front wheel speed sensor bracket?
A:
You shall remove the tire and wheel, the hub and rotor, the wheel speed sensor from the mounting bracket, and the wheel speed sensor mounting bracket.