< Back ×
My Vehicle Change Vehicle
2000 Chevrolet K3500
< Back to View All
Ignition, Distributors & ECM
- Department
- Brands
- Prices
OEM (Genuine) 2000 Chevrolet K3500 ESC Sensor
PartNumber: 10456288
Product Specifications- Notes: All Models; 5.7l; Auto Trans; All
- Other Names: ESC Sensor, Knock Sensor
- Item Dimensions: 2.7 x 2.0 x 1.6 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10456018
- Part Description: 2000 Chevrolet K3500 ESC Sensor
Vehicle Fitment- 2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 7.4 L GAS
$49.28 MSRP:$93.01You Save: $43.73 (48%)
Delphi® Ignition Knock Sensor for 2000 Chevrolet K3500
PartNumber: AS10012Product Specifications- UPC: 689604103012
- Part Description: 2000 Chevrolet K3500 Ignition Knock Sensor
Vehicle Fitment- 2000 Chevrolet K3500 | All Trims | 8 Cyl 7.4L
$43.62
Walker Products® Ignition Knock Sensor for 2000 Chevrolet K3500
PartNumber: 242-1080Product Specifications- Connector Gender: Female
- Connector Quantity: 1
- Connector Shape: Round
- Length: 53.09 mm
- Mounting Hardware Included: No
- Terminal Gender: Male
- Terminal Quantity: 1
- Terminal Type: Bullet
- UPC: 724620113994
- Wiring Harness Included: No
- Part Description: 2000 Chevrolet K3500 Ignition Knock Sensor
Vehicle Fitment- 2000 Chevrolet K3500 | All Trims | 8 Cyl 7.4L
$58.08
Delphi® Ignition Knock Sensor for 2000 Chevrolet K3500
PartNumber: AS10015Product Specifications- UPC: 689604102985
- Part Description: 2000 Chevrolet K3500 Ignition Knock Sensor
Vehicle Fitment- 2000 Chevrolet K3500 | All Trims | 8 Cyl 5.7L
$38.45
Walker Products® Ignition Knock Sensor for 2000 Chevrolet K3500
PartNumber: 242-1034Product Specifications- Connector Gender: Female
- Connector Quantity: 1
- Connector Shape: Round
- Length: 54.17 mm
- Mounting Hardware Included: No
- OE Part Number: 10456031, 10456018
- Terminal Gender: Male
- Terminal Quantity: 1
- Terminal Type: Blade
- Threaded End Diameter: 14 mm
- UPC: 724620074639
- Wiring Harness Included: No
- Part Description: 2000 Chevrolet K3500 Ignition Knock Sensor
Vehicle Fitment- 2000 Chevrolet K3500 | All Trims | 8 Cyl 5.7L
$25.15OEM (Genuine) 2000 Chevrolet K3500 Sensor, Knock
PartNumber: 10456232
Product Specifications- Notes: All Models; 7.4l; Auto Trans; All
- Other Names: Knock Sensor
- Item Dimensions: 2.2 x 2.2 x 2.3 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet K3500 Sensor, Knock
Vehicle Fitment- 2000 Chevrolet K3500 | Base, Cheyenne, LS, Silverado | 8 Cyl 7.4 L GAS
FAQ for Knock Sensor Repair
Q: How to test the terminal contact of the flat wire (dock and lock) connectors?
A:
The proper way is to remove the component in question, visually inspect each side of the connector for signs of contamination, inspect the terminal bearing surfaces of the flat wire circuits for splits, cracks, or other imperfections that could cause poor terminal contact, and insert the appropriate adapter from the J 42675 Flat Wire Probe Adapter Kit on the flat wire harness connector to test the circuit in question.
By Bob
GM Specialist
01/11/2022Q: How to remove the knock sensor?
A:
You shall disconnect the negative battery cable, and remove the knock sensor harness connector, and the knock sensor from the cylinder block.
By Bob
GM Specialist
01/11/2022Q: What should be noticed while servicing the SIR/SRS wire pigtail?
A:
You must not make wire, connector, or terminal repairs on components with wire pigtails. A wiring pigtail is a wire or wires attached directly to the device (not by a connector). If a wiring pigtail is damaged, you must replace the entire component (with a pigtail). The inflatable restraint steering wheel module coil is an example of a pigtail component.
By Bob
GM Specialist
01/11/2022Q: How to install the knock sensor?
A:
The proper way is to install the knock sensor and the knock sensor harness connector and connect the negative battery cable.
By Bob
GM Specialist
01/11/2022